Recent content by aradij

  1. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    hi Mate! Merry Christmas to everyone! simply follow the guide in post #1 step by step and You will be good! the 9470m setup /install acpi with 9470m files/ works fine in my hack.
  2. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    Just want to say again: Thank You RehabMan for all your hard work in the hackintosh community, You rock! :headbang: Previously I used Elitebook 2560p & 2170p for hack, both works great with El Cap based on your guide. This is my 3. install, this time on Folio9470m and seems like I finally found...
  3. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    I replaced the original Intel card to the same card in my HP 2170p, the system info in bios shows test wlan, but the wifi is working perfectly in OS X with the guide in the first post. Bt works as well, only the status led blinking, which is not normal if a combo card is in use. (My hackbook...
  4. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    I did a fresh install 10.11.6 yesterday and I have audio most of the times/9 from 10/. At some boot I don't have battery infos, needs to restart to get it back. I only did the steps from the guide. I'll take your advice and let the system works, I don't mess with kext and will see if it...
  5. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    Another info about HP 2170P with i5-3427U CPU. Without -xcpm boot flag the CPU stuck at 1,7Ghz but doesn't have kp, the laptop boot in normal. I tried both ways to generate SSDT.aml /with&without -w 3 in the script/.
  6. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    Only the Intel wifi card has been pulled off and replaced to 43224HMS and BT gone. If I add it back to the laptop then BT is back, BIOS recognize it and show the card info at system info panel. My 2170p has no built-in BT, it's integrated to wifi card. I found this...
  7. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    Don't have any BT device in BIOS, don't need to check in Windows.
  8. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    I changed my signature/profile right now. Sorry, I'm trying to say that HP 2170P doesn't have built-in BT, It uses a combo mpcie card, so the guide regading this is not correct. If I want BT+wifi then I need a BT+wifi card, for ex. Broadcom 43225HMB/4352HMB. I will try a new install, and see...
  9. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    hello RehabMan! sorry for the not replied request regarding Elitebook 2560p problem report files, but I changed my config to a 2170p, because of the usb3 and the backlit keyboard. I would like to correct the guide regarding the BT. The Elitebook 2170p use a combo BT + wifi card. /I changed to a...
  10. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    Is express card enabled by default in these configs? Should it be visible under pci devices if everything is normal?
  11. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    I've read many comments on Amazon for example regarding this Gmyle usb3 card. All of the users disabled SIP in El Capitan and used the Calldigit usb 3 drivers for this card and they reported successful install and working usb 3 ports. When I boot with USB for first time after install El Capitan...
  12. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    hello RehabMan! how can i activate the express card slot in 8x60p setup? I've got a Gmyle 2 slot usb 3 express card for my 2560p and need the activated slot. Can You give an advice? thanks :)
  13. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    it's enabled by default for power saving
  14. aradij

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    maybe You can try my working Clover setup I attached the Clover directory from my EFI partition, You can replace yours at EFI partition /HDD/ and see if it works /I changed the SSDT to match your cpu, i7-2620m/ but if You followed RehabMan guide You should have the same /I used 6x60 files at patch/
Back
Top