Solved! Bear in mind for the following post that my SMBIOS is iMac17,1 and has 3 monitors all running over Displayport...
I fixed my graphics problems! I'm not sure what combination of solutions worked here (or whether it was just one), but I tried Lilu+NvidiaGraphicsFixup with EmuVariable64, I...
Just tried AGDPfix.app now (made sure to do it at 0x67), then rebooted, then installed the drivers (still at 0x67, disregarded the warning message). It didn't work. Nothing works, lol.
Well, I tried option 4 outlined here which essentially does the same thing as AGDPfix.app right? If so, it made no difference :/
I'm out of options at this point afaik.
Note that it says this though:
> Install the Lilu.kext & NvidiaGraphicsFixup.kext in /Volumes/EFI/EFI/CLOVER/kexts/Other. It says it's for MacPro6,1 but omrij confirms it works for iMac15 and pastrychef confirms it works for the iMac 17 board IDs as well.
Which I've already done?
Have followed this guide along with the additional commentary by Raouws here, and I'm still cursed with a black screen... iMac17,1.
Checklist:
Installed EmuVariableUefi.efi
Made sure to set CsrActiveConfig to 0x00 then reboot, then change to 0x67, then install the latest (120) drivers
Have...
Followed this guide quite successfully to get El Capitan and then Sierra up an running on my build. Tried a clean install with High Sierra today following a mix of this guide and the tonymacx86 High Sierra bootable USB guide. One word: don't. LOL.
kextd stall[0], (240s): 'AppleACPICPU'
Hey guys! I've followed this guide to the letter, and my hackintosh is currently stuck/frozen (aka the progress bar hasn't moved in about 30 minutes) about 4/5ths of the way through the first initial boot, after installing macOS and booting from Clover — beachballed.
After rerunning the above...
Same problem here, except under 10.12 and with a WD HDD. The drive does not mount, does not appear in Finder, does not appear in diskutil, or in the system inspector. Port choice does not matter. But, I can get OS X to display a "needs power" notification if I try to connect it to the USB port...
Hey. Yeah, all these are still issues, but they haven't annoyed me enough to take corrective actions to resolve them. I've just finished upgrading to 10.12 today, so I'll see if this resolves any of them (or introduces new issues!). If not, pmset is probably a good place for me to look at for...
Hey there. I followed Ammulder's guide to get my system running on ElCap, but now after upgrading to 10.12.1 I'm facing this no-WiFi issue. I don't even have the above kext installed on my system and never did. For my Broadcom card, I had BrcmFirmwareStore (2.2.2) and BrcmPatchRAM2 (2.2.2)...
Hi All, I'm going from 10.11 to 10.12 using the instructions on the first post of this thread, and foolishly forgot to inject kexts and set the no cache option when I was prompted to install macOS. Sierra installed, and while I can boot into it and get to the desktop, I have neither sound nor...
Hey ammulder,
I used your guide a while back to create a rather successful hackintosh, except using a Gigabyte Z170 Gaming 1 board. You gave me some specific advice pertaining to my board here.
It's all working very well, except for my USB's; they'll appear fine when plugged in initially, but...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.