Recent content by 123xxx

Thought I'll reply to my own question since it may be helpful for someone else. I simply changed all the bios settings to what they were before (before plugging in my hard drives on first boot) - using this guide posted for Gigabyte socket 1155 motherboards. Didn't have to change anything...

Z77X UD5H motherboard replacement question (SOLVED) !! hi guys, I built my hackintosh a few months back and all was running rock solid until I got unlucky and my motherboard died (z77x ud5h). I am getting a replacement board (same as before) today. Just wanted to know whether I would have to...

Just built my first Hackintosh with Unibeast 1.7 and ML 10.8.4 - the GTX 770 was recognized out of the box! no drivers needed, 10.8.4 has native support for this card! just make sure on Multibeast you leave out the GTX 6xx series part, and only tick 'GraphicsEnabler=no' under the graphics...

Right, internet is as fast as it should be on both windows and mac - so no issues there (Also using Intel port). I highly recommend the EVGA GTX 770 SC ACX - the performance is superb! working like a charm on both win/ mac. Getting 120+ FPS on Battefield 3 - high settings :shock: and around...

Yeh, will surely do a build log! Gotta give back :) Right as for the drives, all four drives are plugged into the Sata 3 6gbps ports. Both mac drives are in the grey ports, and both windows in the white ports. Hope this helps. Also, somehow all USB ports, including 3.0 are working, and so is...

Got it working! simply removed the sad and storage drive for mac. Connected new SSD, didn't change any bios settings here. Set boot priority to new windows SSD and windows installed fine. Once windows was setup I installed another sepreate storage drive Reconnected OSX ML & storage drive -...

I just installed ML 10.8.4 with unibeast 1.7 on my first hackintosh - and the GTX 770 works out of the box! In multibeast I left out the GTX 6xx series bit, and just ticked 'GraphicsEnabler=no' seems pretty stable as of yet - the card was recognized on the first boot, will test with final cut...

Yes, just built my first hackintosh with Unibeast 1.7 running ML 10.8.4 - the EVGA gtx 770 sc worked out of the box! will test with final cut and post soon :mrgreen:

Thanks for your reply! Just finished my install and everything seems to be running :mrgreen: I installed ML 10.8.4 via unibeast 1.7 and followed your multibeast 5.3.1 settings, except for the Gtx 6xx series part. I checked 'GraphicsEnabler=No' though just so it boots as you mentioned. The gtx...

hey, this is one sweet build - i am getting the exact same components tomorrow, except for a different graphics card, psu and case. I think iv'e understood most of how I would get ML working, but was a little confused with the graphics. I am getting the GTX 770, ive read elsewhere that its...

Hello everyone, This looks like a great build! and I am planning on buying the exact same rig, but with a different CPU and RAM. CPU: Intel Core i7 3820K, S 2011, Sandybridge-E, Four Core, 3.4GHz, 10MB Smart Cache, 130W, Retail (Would Multibeast settings change for this CPU? if I were to...