-= MSI B85M-P33 and Intel Core i3-4130 compatibility =-

[Mic3280]

Hello everyone,

it's been a long time since I didn't try to install Mac OS X on my computer. Why? Either because my computer was not compatible or because I was lost in all setting for driver, etc. In fact, I'm still new in the Hackintosh world.

Before starting, I want to say than I'm french, so sorry if some grammatical errors are in my text.

So I want to know if my computer is compatible with Mac OS X Yosemite. This is my configuration (using Ma-Config.com):

Processor: Intel Core i3-4130 (3.4 GHz)
Motherboard: MSI B85M-P33 (MS-7817) 1.0 (microATX)
Chipset: Intel B85 Express (Northbridge: Intel Haswell v06, Southbridge: Intel ID8C50 v05)
Memory: 8GB (2x4 GB) DDR3 1600 MHz
Graphic card: GIGABYTE GeForce GTX 760 OC 2GB
Audio chipset: Realtek ALC887 (Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller and NVIDIA Corporation GK104 HDMI Audio Controller)
Ethernet: Realtek 8111G + ASUS PCE-N10 11n Wireless LAN PCI-E Card
HDD: 2TB SATA III (ST2000DM001-1CH164)
DVD drive: SH-224DB

That's it! So I would like to know which option I need to select in MultiBeast and which flag I need to write at Chimera boot screen (if I need to).

Thank you!

 

[Mic3280]

Ok so I successfully installed Mac OS X Yosemite on my computer. I follow the guide using Clover (UEFI motherboard). The only kexts I use is fakeSMC.kext, RealtekRTL8111.kext and VoodooHDA.kext (with that kext, I modified the file VoodooHDA.kext/Contents/Info.plist. I set the Gain option to '0').

I just have one problem: my Asus wireless card doesn't work and will not work because it's not compatible. So I will buy a new one.

If you have the same configuration and want some help, I'm here!

(I upload the Realtek kext and the modified VoodooHDA, just need to say thank!)

 

[Ryanthe24]

Ok so I successfully installed Mac OS X Yosemite on my computer. I follow the guide using Clover (UEFI motherboard). The only kexts I use is fakeSMC.kext, RealtekRTL8111.kext and VoodooHDA.kext (with that kext, I modified the file VoodooHDA.kext/Contents/Info.plist. I set the Gain option to '0').

I just have one problem: my Asus wireless card doesn't work and will not work because it's not compatible. So I will buy a new one.

If you have the same configuration and want some help, I'm here!

(I upload the Realtek kext and the modified VoodooHDA, just need to say thank!)

i noticed that you said uefi motherboard after you said you followed the guide to clover. what options did you choice in clover to get it to boot