[Success] nab’s INTEL NUC DC3217IYE (CLOVER/Yosemite)

[docf]

[success] nab’s INTEL NUC DC3217IYE, i3-3217U (ethernet edition)

HelloI successfully installed 10.10 on my nuc with the guide and clover. (btw thank you)I only have one problem. I can´t boot in silent quiet mode.I tried to modify the config with the clover configurator an the chameleon wizard but nothing works.The boot loader always stops on the selection screen where i can choose the os or recovery image.How do i activate the quiet boot with clover?Thank´s in advancedocf

 

[nikkpaps]

[success] nab’s INTEL NUC DC3217IYE, i3-3217U (ethernet edition)

does anyone tried to update to 10.10.2 ??? is it safe ?










done i did the update all are working great

 

[nikkpaps]

[success] nab’s INTEL NUC DC3217IYE, i3-3217U (ethernet edition)

is it safe to update clover via clover configurator ???? i run on 3113 and i see the 3142


i tried it and its ok

 

[catch22alex]

[success] nab’s INTEL NUC DC3217IYE, i3-3217U (ethernet edition)

HelloI successfully installed 10.10 on my nuc with the guide and clover. (btw thank you)I only have one problem. I can´t boot in silent quiet mode.I tried to modify the config with the clover configurator an the chameleon wizard but nothing works.The boot loader always stops on the selection screen where i can choose the os or recovery image.How do i activate the quiet boot with clover?Thank´s in advancedocf

make sure you are specifying the default boot volume (e.g. it is Macintosh HD for my machine). It won't do the autobot without it.

 

[catch22alex]

[success] nab’s INTEL NUC DC3217IYE, i3-3217U (ethernet edition)

I had much better success using my own config.plist (modified from rehabman's standard), going DSDTless, and generating my own SSDT on my DC3217BY. the config.plist posted for clover in this thread did not work well for me at all.

 

[nabs]

I had much better success using my own config.plist (modified from rehabman's standard), going DSDTless, and generating my own SSDT on my DC3217BY. the config.plist posted for clover in this thread did not work well for me at all.

I am not sure what people are expected to do with this info - the set up and config I described works-for-me, perhaps you can expand on your comments or supply the config you used.

 

[nobodynose]

I'm having a hell of a time trying to get Wifi working on my Intel NUC with Yosemite (and Clover). I have the DC3217BY variant (no Ethernet), and I have a Mini PCIe card that identifies itself in DPCIManager as a Broadcom BCM43224 (VendorID 14e4, DeviceID 4353).

This setup worked perfectly with Mountain Lion. I used the toledaARPT.kext enabler then (with Chimera), but that isn't working now with Yosemite and Clover. I've also tried the SSDT injection method to no avail. I'm trying to avoid building a DSDT or using kext edits (which don't survive future updates).

So DPCIManager can see the card, but Yosemite doesn't think there are any network devices installed. Does anyone have any insights (better yet, a solution!)?

UPDATE: OK, I got Wifi working finally, I just had a hard time following toleda's guide. I got HDMI audio working as well (I'm getting better at following toleda's guides ). But I don't have a clue about Thunderbolt, and I haven't seen anyone reporting it working on this model NUC, at least not with Yosemite. System Info says "No Thunderbolt hardare was found." Does anyone know anything about this?

 

[VenimK]

Clover / Yosemite 10,10,3 Works on intel nuc 3217IYE
only with FakeSMC and nic kext

With BIOS 0039

 

[nabs]

I have been able to upgrade to 10.1, 10.2, 10.3 using the app store - no issues so far.

 

[Drumitar]

I'm having a hell of a time trying to get Wifi working on my Intel NUC with Yosemite (and Clover). I have the DC3217BY variant (no Ethernet), and I have a Mini PCIe card that identifies itself in DPCIManager as a Broadcom BCM43224 (VendorID 14e4, DeviceID 4353).

This setup worked perfectly with Mountain Lion. I used the toledaARPT.kext enabler then (with Chimera), but that isn't working now with Yosemite and Clover. I've also tried the SSDT injection method to no avail. I'm trying to avoid building a DSDT or using kext edits (which don't survive future updates).

So DPCIManager can see the card, but Yosemite doesn't think there are any network devices installed. Does anyone have any insights (better yet, a solution!)?

UPDATE: OK, I got Wifi working finally, I just had a hard time following toleda's guide. I got HDMI audio working as well (I'm getting better at following toleda's guides ). But I don't have a clue about Thunderbolt, and I haven't seen anyone reporting it working on this model NUC, at least not with Yosemite. System Info says "No Thunderbolt hardare was found." Does anyone know anything about this?

care to share on how to get hdmi working with the by version of the nuc ? i can load a kext to get it working, but if there is way to do it with clover so i dont have to reload it every update it would be awesome !