Contribute
Register

samsung np370r5e-s06

Status
Not open for further replies.
Removed ACPIBacklight.kext nothing changed... So is this the end ? )

What hardware?

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Also...

Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply to an ioreg from any other version of IORegistryExplorer.app.
 
What hardware?

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Have to install windows...
Build Signature is blank

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution


System: Samsung np370r5e-S06 (Clover)
CPU: i3-3120m
MB Chipset Intel Ivi Bridge rev 09
Southbridge Intel HM76 rev 04
Graphics: HD4000, 1366x768 (Board manuf 0x144D (0xC706))

View attachment DayWidows.zip

Also...

Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply to an ioreg from any other version of IORegistryExplorer.app.

Make it in next post ... need to change HDD )

View attachment MacBook Pro — Day.ioreg
 
Have to install windows...
Build Signature is blank

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution


System: Samsung np370r5e-S06 (Clover)
CPU: i3-3120m
MB Chipset Intel Ivi Bridge rev 09
Southbridge Intel HM76 rev 04
Graphics: HD4000, 1366x768 (Board manuf 0x144D (0xC706))

Please... in your profile.

Make it in next post ... need to change HDD )

View attachment 118407

See if the brightness slider starts to work after a sleep/wake cycle.

If not, then I think it is pretty clear your laptop does not have the backlight hooked up to the IGPU backlight control. You can try using "Brightness Fix" or "Brightness Fix (ACPI 100)".
 
Please... in your profile.

May be I'm looking at wrong place but I see this ...
2014-12-19 in 1.09.02.png


See if the brightness slider starts to work after a sleep/wake cycle.
Sleep/wake cycle done... slider is still do not working properly.

If not, then I think it is pretty clear your laptop does not have the backlight hooked up to the IGPU backlight control. You can try using "Brightness Fix" or "Brightness Fix (ACPI 100)".

Trying ...
 
...
Trying ...

Also, in many cases brightness control does not work unless you disable the discrete card in a dual-GPU configuration.

I notice (in ioreg) that your Radeon is still enabled...
 
Also, in many cases brightness control does not work unless you disable the discrete card in a dual-GPU configuration.

I notice (in ioreg) that your Radeon is still enabled...

Done! )))

I've installed back ACPIBacklight.kext
Apply patch "Brightness Fix"
then restore/repair permissions and reboot...
Now Brightness working proper !

Great thanks ))
 
Done! )))

I've installed back ACPIBacklight.kext
Apply patch "Brightness Fix"
then restore/repair permissions and reboot...
Now Brightness working proper !

Great thanks ))

You might even get better results (smooth transitions) with "Brightness Fix (ACPI 100)"...
 
You might even get better results (smooth transitions) with "Brightness Fix (ACPI 100)"...

For me this solution is good enough ))
Now waiting for wifi card ... :beachball:

I owe you a beer )))
 
Still waiting for my wifi card ... delivery is extremely long (suppose Christmas overload)
From the beginning my Numlock is not working properly...
In system log kernel[0]: ApplePS2Keyboard: sending key 45=47 down
The key is not breackless so I suppose that code is wrong...
I'm trying to google but cant find answer :problem:

Can you say what is correct code ?
 
Still waiting for my wifi card ... delivery is extremely long (suppose Christmas overload)
From the beginning my Numlock is not working properly...
In system log kernel[0]: ApplePS2Keyboard: sending key 45=47 down
The key is not breackless so I suppose that code is wrong...
I'm trying to google but cant find answer :problem:

Can you say what is correct code ?

Macs do not have a numlock key. Use Karabiner.
 
Status
Not open for further replies.
Back
Top