Contribute
Register

How To Install OS X Yosemite Using Clover

PLEASE HELP! Now i try to boot my yosemite installation but it stuck on the apple logo, then it change for a stop symbol. It happen after i installed the video drivers for amd. I used this driver several times with my other yosemite installations and runs like a charm. I don`t know what is happen now. Anyone?
 
I have installed Yosemite with the Clover USB installer. Now the issue is that Clover USB installer is not detecting the Yosemite drive so I'm not able to boot in it. Has anyone come across this issue?
 
I moved my Yosemite Chimera installation to Clover recently. Is it safe to use Multibeast after 10.10.x releases or do I use Clover Configurator from now on?
 
I have a stuck at here

WP_20141020_05_09_23_Pro%20%28Medium%29.jpg


It stop at here about 5 minutes and go to this screen. I have wait this screen about 7 hours :crazy:

WP_20141020_05_18_58_Pro%20%28Medium%29.jpg

So how can fix that, please help me :(
 
LukeWarm74
Logging in and getting kicked out repeatedly. You didn't pull a serial from a mac still connected to internet did you? You arent' getting locked account error, your behavior sounds exactly like what happens when you have two macs using same serial kicking eachother off. This will result in a ban pretty quickly if not fixed. If you didn't pull serial from a mac, check it online to see if you managed to generate a legit serial someone owns somewhere in world (it can happen). You need a UNIQUE serial.


To poster above me. Did you install OsxAptioFixDrv? I had this problem until making sure OsxAptioFixDrv was loaded. it'd hang during bootup because this was missing, right in that spot.
 
PLEASE HELP! Now i try to boot my yosemite installation but it stuck on the apple logo, then it change for a stop symbol. It happen after i installed the video drivers for amd. I used this driver several times with my other yosemite installations and runs like a charm. I don`t know what is happen now. Anyone?

Not sure if this will help you, but I had that issue when trying to install with Unibeast. I was using a USB 3.0 slot for the USB boot drive. I moved it to a USB 2.0 and it worked. Not sure if it's the same for Clover though.
 
For people getting the ghostbusters symbol right after "unable to take control of..." make sure you have the "EHCI hand-off" enabled in the bios. For gigabyte motherboards it is under peripherals. Everything went smooth for me after that, except ethernet didn't work. I ended up using multibeast and installing atheros from there, restarted and kernal panic, restarted and booted clover without injecting kexts, and deleted kext from clover.

ga-z77x-ud3h
i5 3570k
hd4000
12 gb 1600 ddr3
 
STEP 4: Post-Installation

....

5. Install Clover to Yosemite with the following Custom settings:
108009d1413735003-how-install-os-x-yosemite-using-clover-clover-11.png

(Custom Install: UEFI-Capable Systems)
108010d1413735007-how-install-os-x-yosemite-using-clover-clover-10.png

(Custom Install: BIOS-Only Systems)


Why ist 'EmuVariableUefi-64' not selected in the final Clover install on the bootdisk? It gets included in Step2-17, when the USB Stick is prepared.

I guess that 'EmuVariableUefi-64' is necessary for NVRAM variables to work (imessage etc..)
 
Last edited by a moderator:
migrated from Chimera to clover and rebooted and my iMessage and FaceTime works now :headbang::thumbup:
 

Attachments

  • Screen Shot 2014-10-20 at 10.21.12.png
    Screen Shot 2014-10-20 at 10.21.12.png
    117.7 KB · Views: 1,286
I'm using hackintosh form the Leopard version and this thread is the perfect and simple guide for installing OS X on a PC. I have an Intel DZ87KLT-75K with CPU i7-4770K with NVIDIA 770 and installed the OS X Yosemite. It works like charm. Many thanks to Clover team.
 
Back
Top