Contribute
Register

Guide To Install Yosemite on HP Laptops with Clover UEFI

[h=1]os x yosemite via unibeast 5, but can't find mach_kernel error ... why ?[/h]

Off-topic. This thread is for Clover.

Open a separate thread for using Unibeast.
 
Hello everything works except sound in Yosemite , press F4 to boot but nothing happens, there is a kexts to enable sound? Probook 4530s
thank you
 
Hello everything works except sound in Yosemite , press F4 to boot but nothing happens, there is a kexts to enable sound? Probook 4530s
thank you

Do you get error with dsdt patch in PBI CE? if no and you already had battery working, just repair permission and rebuild cache, restart until it works. IT' S ALREADY WRITTEN IN THE GUIDE.
 
Do you get error with dsdt patch in PBI CE? if no and you already had battery working, just repair permission and rebuild cache, restart until it works. IT' S ALREADY WRITTEN IN THE GUIDE.
yes I know that's two hours I read the guide and I try, I used the dsdt I had with mavericks sound worked before and it does not work with Yosemite I try to make another dsdt but it says to press f4 to start, I started posting a clover I press F4 keeps spreading it on behalf of the automatic START MODE and it's nothing more ......

édit: ok i used to patch AppleHDA vietnam tool and it works thank you
 
yes I know that's two hours I read the guide and I try, I used the dsdt I had with mavericks sound worked before and it does not work with Yosemite I try to make another dsdt but it says to press f4 to start, I started posting a clover I press F4 keeps spreading it on behalf of the automatic START MODE and it's nothing more ......

édit: ok i used to patch AppleHDA vietnam tool and it works thank you
You have to press F4 AT CLOVER BOOT SCREEN, if not, dsdt patch won't work. Please follow the guide carefully, and if you're stuck, just post troubleshooting files (I also write it in the guide, wonder why u don't want to post it).

also, the use of other tools (even my HVT) is not recommended. You will have problems in the future.
 
Running in to an issue on Laptop 2 (See signature), everything boots fine, gets to install then I go in to disk util and only my USB drive shows up, my SSD nor HDD shows up.

Also, for Laptop 1, doesn't have UEFI boot, will this procedure work with legacy boot as well (Assuming clover supports legacy automatically) if not what changes do I need to make to get clover to boot in bios mode?
 
Running in to an issue on Laptop 2 (See signature), everything boots fine, gets to install then I go in to disk util and only my USB drive shows up, my SSD nor HDD shows up.

Also, for Laptop 1, doesn't have UEFI boot, will this procedure work with legacy boot as well (Assuming clover supports legacy automatically) if not what changes do I need to make to get clover to boot in bios mode?

This thread and forum is for only Probook and Elitebook HP laptops.
 
From my experience 2b. manual way is the best way to create USB stick. I tried to create USB Stick on yosemite (with the 2a. easy guide) and it didn't work. Then I tried with the 2b manual way and it worked.

Thanks!

I installed Yosemite today using manual method for USB stick (2b in the guide).
BTW, following the guide step by step, I discovered that is correct till point 6. Basically there is only one installation phase (no more phase 2). After point 6, you have to go directly to point 10 and so on (you don't need 7-8 and 9 points anymore).

Thanks!
 
I installed Yosemite today using manual method for USB stick (2b in the guide).
BTW, following the guide step by step, I discovered that is correct till point 6. Basically there is only one installation phase (no more phase 2). After point 6, you have to go directly to point 10 and so on (you don't need 7-8 and 9 points anymore).

Thanks!

Updated the guide, thanks!
 
Back
Top