Contribute
Register

X99 Motherboards with Socket 2011-3 Now Available

Status
Not open for further replies.
Sorry my english is so Bad & French :oops:
 
It looks like you made it correctly. I don't know why you aren't able to boot with UEFI. I found the PDF manual for your board a few days ago, I'll look at it later and see if I can find the setting. You should be able to boot from it without changing any bios settings though.
 
Typically it should say something like UEFI: NameofyourUSBdrive in the boot menu... I'm not sure why it doesn't show up. It shouldn't make a difference though whether or not you're booting from UEFI.

Oh, and your English is much better than my French lol
 
sorry i misspoke, in fact, when I prepare the key UEFI, and then selected it in the window's boot (f8), after a few seconds I fall back on the Bios.
 
Do you have secureboot enabled in the bios?
 
if it's set to "Other OS," then Secure Boot is not enabled.

Kind of unusual that it's not working in UEFI boot, but if Clover is booting for you in legacy mode, I wouldn't worry about it too much. You could try disabling launch CSM.
 
if it's set to "Other OS," then Secure Boot is not enabled.

Kind of unusual that it's not working in UEFI boot, but if Clover is booting for you in legacy mode, I wouldn't worry about it too much. You could try disabling launch CSM.

if i disabled launch CSM, here no longer see the USB key at the boot
 
Okay, it doesn't recognize it as being uefi bootable then I guess. You might have a board that requires the efi bootloader to have the same name and location as windows. I forget what it is. I'll get back to you later. Also it could just be a bios bug.
 
Has anyone had any luck getting X99 Motherboards to boot/install/have things work?

I haven't bought the hardware yet, but I was hoping to build something based on the x99 stuff.
 
Status
Not open for further replies.
Back
Top