Guide To Install Mavericks with Clover Bootloader

[wi-fi]

Hi,
I have already found the problem for clover not start: EmuVariableUefi.efi
I have to remove it to see the clover menu!

I installed the OS using the guide of the 1st post. I have to use unibeast to create the MacUSB. Using the guide, at the end of the 1st phase it gives an error about nvram - maybe because of EmuVariableUefi.efi not loaded.

Installed PBI-CE with 9470m option and had to rebuild cache to get sound to work.

Now I have a very slow OS load, between Clover and Login.
Also, if I put an USB drive, the system reboots.

In attach is the dmesg.

Thanks in advance.

 

[RehabMan]

Hi,
I have already found the problem for clover not start: EmuVariableUefi.efi
I have to remove it to see the clover menu!

No such thing as EmuVariableUefi.efi.

File should be EmuVariableUefi-64.efi in EFI/Clover/drivers64UEFI.

 

[nguyenmac]

Hi,
I have already found the problem for clover not start: EmuVariableUefi.efi
I have to remove it to see the clover menu!

I installed the OS using the guide of the 1st post. I have to use unibeast to create the MacUSB. Using the guide, at the end of the 1st phase it gives an error about nvram - maybe because of EmuVariableUefi.efi not loaded.

Installed PBI-CE with 9470m option and had to rebuild cache to get sound to work.

Now I have a very slow OS load, between Clover and Login.
Also, if I put an USB drive, the system reboots.

In attach is the dmesg.

Thanks in advance.

POst troubleshooting files.

 

[wi-fi]

No such thing as EmuVariableUefi.efi.

File should be EmuVariableUefi-64.efi in EFI/Clover/drivers64UEFI.

I write the file name incorrectly.
It is in fact EmuVariableUefi-64.efi.

 

[wi-fi]

POst troubleshooting files.

In annex. Thanks.

 

[nguyenmac]

You may have better luck with latest PBICE, with removed Emu driver.

 

[wi-fi]

You may have better luck with latest PBICE, with removed Emu driver.

I used the Anniversary Edition.
Any idea why my laptop doesn't show the clover menu, with Emu driver enabled?!

Another issue: why one of the cores is always at 100%? See picture.

 

[nguyenmac]

I used the Anniversary Edition.
Any idea why my laptop doesn't show the clover menu, with Emu driver enabled?!

Another issue: why one of the cores is always at 100%? See picture.

You should look at Console for more detail about kernel_task, and try again with latest PBI I just updated.

 

[wi-fi]

You should look at Console for more detail about kernel_task, and try again with latest PBI I just updated.

I make a new instalation from scratch using the new files that you provide.
Using the command from 1st post make MacUSB, it fails at the end of the 1st phase. Log says "system not support nvram".
Again I use unibeast and patch all with the new version of PBI-CE and the result was the same: one core is always at 100% and an USB attach leads to system reboot.
It takes allot of time to boot


Last weak I have used only unibeast + PBI (not CE) and the systems seems to function smoother. I installed with options:
kext: 8x70p or 4x0s G0
dsdt: 8x70p ivy
system: i7 ivy
Before reboot I have to change system to 8.x with chameleon wizard since the system doesn't boot with 9.x profile.
To have sound I have to install RehabMan voodoo kext and GenericUSBXHCI kext for USB3.
The touchpad doesn't work.
And it boots very quickly!


But, PBI (not CE) doesn't have 9470m DSDT and KEXT options!
Any chance to port DSDT from PBI-CE to the chameleon instalation?

I have already made allot of clean installs to try finding the best options

Thanks again.

 

[nguyenmac]

I make a new instalation from scratch using the new files that you provide.
Using the command from 1st post make MacUSB, it fails at the end of the 1st phase. Log says "system not support nvram".
Again I use unibeast and patch all with the new version of PBI-CE and the result was the same: one core is always at 100% and an USB attach leads to system reboot.

Last weak I have used only unibeast + PBI (not CE) and the systems seems to function smoother. I installed with options:
kext: 8x70p or 4x0s G0
dsdt: 8x70p ivy
system: i7 ivy
Before reboot I have to change system to 8.x with chameleon wizard since the system doesn't boot with 9.x profile.
To have sound I have to install RehabMan voodoo kext and GenericUSBXHCI kext for USB3.
The touchpad doesn't work.

But, PBI (not CE) doesn't have 9470m DSDT and KEXT options!
Any chance to port DSDT from PBI-CE to the chameleon instalation?

I have already made allot of clean installs to try finding the best options

Thanks again.

You can change to 8.x. remove -xcpm in bootflag, enable ASUS AICPUPM in config.plist by using CC.