Contribute
Register

Guide To Install Mavericks with Clover Bootloader

Double check that you created the USB correctly. What hardware are you using to create your USB?

Also be sure you have the latest BIOS installed.
My running Arch Linux use UEFI. And I can boot it in any mode of UEFI in BIOS.

I have already copied the files of the Clover partition from post #1 to my HDD EFI partition and continues to show a black screen.
 
My running Arch Linux use UEFI. And I can boot it in any mode of UEFI in BIOS.

I have already copied the files of the Clover partition from post #1 to my HDD EFI partition and continues to show a black screen.

So... you were able to reach Clover on USB and install?

I don't see what Linux has to do with Clover. You should still be certain you have the latest BIOS.
 
So... you were able to reach Clover on USB and install?
No. I never ever seen the Clover menu!
It always hangs at a black screen, using USB or HDD.

I believe that could be a BIOS option... but what? I have unchecked all options mentioned in the first post.
 
No. I never ever seen the Clover menu!
It always hangs at a black screen, using USB or HDD.

I believe that could be a BIOS option... but what? I have unchecked all options mentioned in the first post.

It is either BIOS option, old BIOS version, or incorrectly configured/created USB. Try different things. Different USB stick, different USB ports, update BIOS version if you don't have the latest, reset BIOS to defaults and revisit important options, etc.

Prior to installation, you're booting from USB using Esc+F9 to reach BIOS boot menu.
 
It is either BIOS option, old BIOS version, or incorrectly configured/created USB. Try different things. Different USB stick, different USB ports, update BIOS version if you don't have the latest, reset BIOS to defaults and revisit important options, etc.

Prior to installation, you're booting from USB using Esc+F9 to reach BIOS boot menu.
I have the latest BIOS version and boot using F9 and select file as explained in first post.
I have given the Linux comparison because I already test to boot Clover, copying the contents from first post, directly to the EFI partition on my HDD, that where it stands the files that boots Linux (replaced the BOOTX64.EFI and copied the Clover folder).
 
I have the latest BIOS version and boot using F9 and select file as explained in first post.
I have given the Linux comparison because I already test to boot Clover, copying the contents from first post, directly to the EFI partition on my HDD, that where it stands the files that boots Linux (replaced the BOOTX64.EFI and copied the Clover folder).

Check the contents of your Clover configuration to be sure it is correct/complete. For example, theme specified in config.plist actually exists. Correct drivers in drivers64UEFI, etc. Otherwise comes down to a BIOS setting, Clover version problem, or something else...
 
hi all
im just ordering probook 440 g1 i5 4200M + Azurewave BCMH4352HMB (AW-CE123H)
do i need a whitelist removal bios for windows?
sorry for bad english
 
hi all
im just ordering probook 440 g1 i5 4200M + Azurewave BCMH4352HMB (AW-CE123H)
do i need a whitelist removal bios for windows?
sorry for bad english

So far, no whitelist implemented in the 4x0 G1.
 
Hi all,
I have successfully tripple boot Maverick - Win 8.1 - Ubuntu 14.4 installed, thanks for this guide a lot.

I need to ask you one question, what about the Radeon 7650M, still the option switcheable graphics needs to be switched off?
 
Back
Top