Quick Question...

[HackInBuild]

So I have finished building my hackintosh and I was wondering if I could use Easy Beast without editing any other settings in MultiBeast and have it work with no problems. If I have to use other settings in MultiBeast (other than the ones chosen for me in Easy Beast) then let me know what I should use in this thread: http://www.tonymacx86.com/general-help/138019-what-multibeast-settings-should-i-use.html

P.S. I am allowed to link one of my own threads in another one of my threads... right? If not then I did not mean any harm, and will remove the link as soon as possible.

 

[Asus-Freak]

Easy Beast + your network and audio kext. You might find a search here for GA-Z87X-UD3H to be helpful...

 

[HackInBuild]

Easy Beast + your network and audio kext. You might find a search here for GA-Z87X-UD3H to be helpful...

Ok, I found the audio drivers no problem, but I cannot seem to find the driver(s) for my WiFi card. I am using the TP-LINK TL-WDN4800.

 

[Asus-Freak]

Supposedly the card works oob with native drivers, do a search here for TP-LINK TL-WDN4800 to troubleshoot...

Also, might want to read the rules and put your specs in your profile so people know what hardware you're using, can't help without it...

 

[HackInBuild]

Supposedly the card works oob, do a search here for TP-LINK TL-WDN4800 to troubleshoot...

Ok one last question... I got the boot0 error and I am aware of how to fix it, but I am using an SSD. Is the process for fixing the drive the same as on a hard drive?

 

[Asus-Freak]

Can't tell ya, never seen a boot0 error on a SSD, didn't think that could happen. Would be very very hesitant to try the boot0 fix on it until you had more info.

 

[MacMan]

Ok one last question... I got the boot0 error and I am aware of how to fix it, but I am using an SSD. Is the process for fixing the drive the same as on a hard drive?

I saw the boot0 error on a Crucial M550 SSD. The instructions at http://www.tonymacx86.com/25-boot0-error-official-guide.html works.