Quick Fix for Intel HD 4600 Graphics Acceleration on 9 Series Motherboards

[toleda]

Thanks tonny. It worked with transparent menu bar but the F12 adding gadget has no water effect any idea? And HdMI audio with Dsdt patch has no audio.

A better test: Launchpad, hold the Option key, with icons moving; hardware acceleration is working. HDMI audio, off topic.

 

[tonymacx86]

Still necessary in 10.9.4- I've attached the fixed version to the Original post.

 

[kidalive]

This patch worked for 10.9.3 but not for 10.9.4. I tested and confirmed. After update the screen becomes messed up and I boot into safe mode to add the fix but stuck at boot with an exclamation symbol in the middle of command line. Any fix?
P.S. My mistake, it worked. I duplicated a KEXT into the Applesystemdrive.kext. It caused the panic.

 

[kidalive]

The fix is fully working with 10.9.3 but not for 10.9.4.
Problem solved. Working again.

 

[kidalive]

A better test: Launchpad, hold the Option key, with icons moving; hardware acceleration is working. HDMI audio, off topic.

Yes, it worked. Fully working. Brilliant fix. Any fix to the SATA/SataExpress? The Intel 9 chipset is not recognized. System info shows generic AHCI controller. Also the HDMI audio is not working.

 

[caonliu]

Hi, toleda.
Thanks for your fix. But it does not work on my build.
Here are my build:
CPU: i5-4570
MB: ASUS Gryphon Z97 Armor Edition
Monitor: HDMI (with audio needed) x 1 only

OSX: mavericks 10.9.3
by using clover 2703

I had put the fixed kext into SLE with fixing permission and rebuilding caches. After reboot, with (or without) inject id of 0x0300220D (or 0x0D220003) the display does not be drived.
By using your "HD4600+/HD4000/HD3000 Framebuffer Edit Scripts", same problem.
Thank you so much if you can help me solve the problem~

 

[theklavej]

Hi Tony and all others. I did a Gigabyte z87n/UDH3 for a friend. All is fine, CPU has HD4600 inside, can this fix be used with z87 - i5 as well ?

 

[toleda]

I had put the fixed kext into SLE with fixing permission and rebuilding caches. After reboot, with (or without) inject id of 0x0300220D (or 0x0D220003) the display does not be drived.

Three different problems.
Most important, how are you injecting the framebuffer?
How did you install the Azul kext?
Framebuffer edits are not required for successful boot.

 

[toleda]

CPU has HD4600 inside, can this fix be used with z87 - i5 as well ?

Solves a motherboard chipset problem. 9 Series only fix, 8 Series is native.

 

[caonliu]

Three different problems.
Most important, how are you injecting the framebuffer?
How did you install the Azul kext?
Framebuffer edits are not required for successful boot.

Hi, toleda.

1. I inject the framebuffer by using clover's ig-platform-id.
2. I install the Azul kext by using kext wizard.
3. all right. I have restored orignial kext and updated to 10.9.4.
Here are something new:

Firstly, I used kext wizard to install kext file from "Azul-10.9.4-9series.zip" into SLE.
Secondly, I edited clover's config.plist file setting.
(1).config.plist/Graphics/ig-platform-id/0x0D220003
tested by using three settings individually:





all above consequense a black screen without signal output. after a few time, machine reboot automatically.
EXCEPT: use fakeid=0x80860412, it would entere OSX but no QE/CI.

(2)config.plist/Graphics/ig-platform-id/0x0300220D
a.

this configuration would cause a recognition of "display"：


b.

c.

b and c would get a correct recognition:

All above does not need a fakeid to boot. But no QE/CI.