- Joined
- Feb 21, 2014
- Messages
- 28
- Motherboard
- GA-Z97X-UD5H
- CPU
- i7-4770K
- Graphics
- ASUS GTX 650 1GB
- Mac
- Classic Mac
- Mobile Phone
Hello guys, i'm having some trouble with my new mavericks install.
Today I have finally finished building my new PC, these are my specs:
i7 4770k
Z97N-WiFi
2x4GB Vengeance Red 1600MHz CL9
Samsung 840 120GB (for Windows only)
WD Green 1.5TB 64MB Cache (for data Windows + Hackintosh)
OCZ Agility 3 60GB (for Hackintosh only)
The problem is that I can't boot the setup without params. I can reach it only with -v -x params, and then continue the setup. Without these params i got errors like deadbeef. I noticed that after a clean setup, it get stuck while the Apple logo is loading something. The only way I can boot is using -v -x params, even after installing kext.
I also can't reboot, if i choose to reboot inside my hackintosh (which is still running in -v -x mode, so in compatibility mode), the session got closed but I understood that something is going wrong with the ACPI.. the system is completely frozen, everything is powered up, but the CPU isn't working. So I have to reset the system or shutdown it manually.
What do you suggest to do? Sometimes after reaching the disk utility (with no params) to prepare my SSD, the setup freezes and I'm forced to reboot manually, avoiding me to complete setup.
I was reading that could be a bluetooth-related problem, launching the system using -v mode I can notice that the system wait a long long time for a response (from a bluetooth kext maybe?)
Any help would be appreciated
Today I have finally finished building my new PC, these are my specs:
i7 4770k
Z97N-WiFi
2x4GB Vengeance Red 1600MHz CL9
Samsung 840 120GB (for Windows only)
WD Green 1.5TB 64MB Cache (for data Windows + Hackintosh)
OCZ Agility 3 60GB (for Hackintosh only)
The problem is that I can't boot the setup without params. I can reach it only with -v -x params, and then continue the setup. Without these params i got errors like deadbeef. I noticed that after a clean setup, it get stuck while the Apple logo is loading something. The only way I can boot is using -v -x params, even after installing kext.
I also can't reboot, if i choose to reboot inside my hackintosh (which is still running in -v -x mode, so in compatibility mode), the session got closed but I understood that something is going wrong with the ACPI.. the system is completely frozen, everything is powered up, but the CPU isn't working. So I have to reset the system or shutdown it manually.
What do you suggest to do? Sometimes after reaching the disk utility (with no params) to prepare my SSD, the setup freezes and I'm forced to reboot manually, avoiding me to complete setup.
I was reading that could be a bluetooth-related problem, launching the system using -v mode I can notice that the system wait a long long time for a response (from a bluetooth kext maybe?)
Any help would be appreciated