Contribute
Register

HP ProBook Installer 6.1: 4x30s and 4x40s support

does PBI work with 430/450 gx probooks?

I've read here its yes, but like to be sure.

Code: 
https://github.com/philippetev/HP-ProBook-Installer/wiki
There are options for every ProBook series, supported by the Installer:

  • ProBook 4x30s
  • ProBook 4x40s
  • ProBook 6x60b/EliteBook 8x60p
  • ProBook 6x70b/EliteBook 8x70p
  • ProBook 4x0 G0
Click to expand...
 
Good friday to all.

I updated to 10.9.2 with PBI 6.1.13 and now I've noticed that when I put my lappy to sleep (closing the lid) upon wake, the trackpad and keyboard are not responsive on the lock screen. So I'm not able to put in my password and the only solution is a hard reboot.

I tested this multiple times and it seems to happen 90% of the time.

Anyone else seeing this?
 
noreye said:
Good friday to all.

I updated to 10.9.2 with PBI 6.1.13 and now I've noticed that when I put my lappy to sleep (closing the lid) upon wake, the trackpad and keyboard are not responsive on the lock screen. So I'm not able to put in my password and the only solution is a hard reboot.

I tested this multiple times and it seems to happen 90% of the time.

Anyone else seeing this?
Click to expand...

Not seeing it. Did you repair permissions & rebuild cache and do EC reset?
 
RehabMan said:
Not seeing it. Did you repair permissions & rebuild cache and do EC reset?
Click to expand...

RM, I had a strange problem.. I have restarted my system and in the bios section it showed up a warning saying that no system was installed on the hard disk.
Solved using Unibeast usb to boot and reinstalling chameleon.
First time that happen.
Maybe it is time to definetely pass to clover?

Thanks!
 
I attached my ioreg file, can someone pls verify if my notebook is up to the full capabilities (i am doing this because i think that in geekbench 3 i lost 600 points in the score)

Now i have 5177, and previously, before PBI 13, I had 5650 point

Pls someone if available to check the file if everything is tuned correctly so I know if I need to re-run the PBI again

My specs are:

Pro Book 4740s:

i5 processor

SSD Kingston

HD4000

Ivy Bridge

10x for keeping it going
 

Attachments

  • X Io reg.ioreg
    1.6 MB · Views: 103
Joyfult said:
RM, I had a strange problem.. I have restarted my system and in the bios section it showed up a warning saying that no system was installed on the hard disk.
Solved using Unibeast usb to boot and reinstalling chameleon.
First time that happen.
Maybe it is time to definetely pass to clover?

Thanks!
Click to expand...

Not sure of the cause, but it happens when you do something that resets the active partition on MBR (eg. where you have no active partition).
 
ringov said:
I attached my ioreg file, can someone pls verify if my notebook is up to the full capabilities (i am doing this because i think that in geekbench 3 i lost 600 points in the score)

Now i have 5177, and previously, before PBI 13, I had 5650 point

Pls someone if available to check the file if everything is tuned correctly so I know if I need to re-run the PBI again

My specs are:

Pro Book 4740s:

i5 processor

SSD Kingston

HD4000

Ivy Bridge

10x for keeping it going
Click to expand...

You might check your SSDT to see if it makes sense for your CPU spec. You have not provided any information about the CPU in your laptop, so I can't tell you... Otherwise ioreg looks normal.

Your boot drive is SSD. Did you use TrimEnable to enable TRIM?
 
RehabMan said:
Not seeing it. Did you repair permissions & rebuild cache and do EC reset?
Click to expand...

It seems to have fixed the problem but its strange since I did all that the day before. I will be sure to put that as my first steps of problems solving.

Thanks.
 
RehabMan said:
You might check your SSDT to see if it makes sense for your CPU spec. You have not provided any information about the CPU in your laptop, so I can't tell you... Otherwise ioreg looks normal.

Your boot drive is SSD. Did you use TrimEnable to enable TRIM?
Click to expand...

My Cpu is: Intel's Core i5-2450M Ivy Bridge

Can u or someone pls assist me how to check the SSDT settings?

Ofcourse i use trim and everything looks super :)

Still trying to figure out where i lost 600 points on Geekbench 3 . . .
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top