Asus k53sc keyboard mouse issues after installation

[bfmramalho]

See post #4.

After installing and flowing this steps
- UserDSDT or DSDT-Free Installation
- Drivers & Bootloaders -> Drivers -> System -> Patched AppleIntelCPUPowerManagement
(be sure to select the version appropriate for the version of OS X you have installed)
- Customization -> System Definitions -> MacBookPro8,1

After reboot I still can't boot without he USB installation
and when I boot it freezes and then an error

I can boot whit -x but I don't have mouse
with -v don't boot with errors
with -f I have mouse and keyboard
what is wrong

 

[RehabMan]

After installing and flowing this steps
- UserDSDT or DSDT-Free Installation
- Drivers & Bootloaders -> Drivers -> System -> Patched AppleIntelCPUPowerManagement
(be sure to select the version appropriate for the version of OS X you have installed)
- Customization -> System Definitions -> MacBookPro8,1

After reboot I still can't boot without he USB installation
and when I boot it freezes and then an error

I can boot whit -x but I don't have mouse
with -v don't boot with errors
with -f I have mouse and keyboard
what is wrong

Boot "-v" and show a photo of the screen that results. It is probably a graphics issue as you haven't setup graphics correctly to this point.

 

[kanchudeep]

Hello everybody
Im new in this world of hackintosh
I made a USB with mavericks and unibeast
I can install everything without any problem. Then I after the first boot I install the multibeast then when I reboot again I don't have keyboard and mouse?
What can I do to fix this?
Im installing now for the 3rd time

Were you able to get it working?

I'm am planning to do a hackintosh on same model....

 

[RehabMan]

Were you able to get it working?

I'm am planning to do a hackintosh on same model....

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"