Contribute
Register

Unibeast 3.0.1 Maverick install rebootloop after Apple boot screen

Status
Not open for further replies.
Hello RehabMan,

Sorry for the confusion. I'm stuck in: "STEP 5: Post-Installation Using MultiBeast, nr. 4".
So i boot from USB-Unibeast- stick, and select in Chimera screen, the Mavericks HD.

Boot with "IGPEnabler=No -x -v" and give it plenty of time. It is not fast.
 
Oké, it starting now.....
 

Attachments

  • image.jpg
    image.jpg
    474.1 KB · Views: 253
Still waiting.......

It is a graphics problem. Do you have a monitor you can plug in? Usually 'IGPEnabler=No -x -v' takes care of it. If not, you may have to remove some graphics kexts, or try various IGPlatformID values (w/ IGPEnabler=Yes).
 
I only have a HDMI output. I connect a HDMI monitor, but no screen;-(

Can you suggest some kext to remove? The graphics is a Intel HD 4400.
 
I only have a HDMI output. I connect a HDMI monitor, but no screen;-(

Can you suggest some kext to remove? The graphics is a Intel HD 4400.

The kexts to remove would be the intel ones (AppleIntelHD*, AppleIntelSNB*, AppleIntelFrame*)

You might also try Chameleon. People are having better luck on laptops with Chameleon and IntelAzulFB values (usually 11 or 12).
 
Hello RehabMan,

Thanks for your help, sorry for my late response.
I gave up this laptop and swapped it for a Asus R510CA.

I'll try later to install Mavericks on that with UEFI Clover.

This Thread can be closed....

grt.

Tebogo
 
Hello I having the same problem reboot loop installing Maverick using Unibeast I using 16 GB PNY pend drive my system spec is.

Mainboard: Asrock G41M-VS3 R2.0
Bios Version: G41M-VS3 P1.90 (recently update)
Bios Vendor: AMIBIOS
4GB Ram
CPU: Intel E5300 2.60 GHz (64bit)
CPU Microcode Update: 1067A/A07
GPU: nVidia Geforce 8400 GS 512Mb DDR2 (64bit)

I configure Bios settings anything don't fix my problem I'm running SL only problems i have is No see video, Voodoo audio sound chipset is VIA VT1705. NEED HELP Please......
 
Hello I having the same problem reboot loop installing Maverick using Unibeast I using 16 GB PNY pend drive my system spec is.

Mainboard: Asrock G41M-VS3 R2.0
Bios Version: G41M-VS3 P1.90 (recently update)
Bios Vendor: AMIBIOS
4GB Ram
CPU: Intel E5300 2.60 GHz (64bit)
CPU Microcode Update: 1067A/A07
GPU: nVidia Geforce 8400 GS 512Mb DDR2 (64bit)

I configure Bios settings anything don't fix my problem I'm running SL only problems i have is No see video, Voodoo audio sound chipset is VIA VT1705. NEED HELP Please......

Not a laptop. Please post your question to the Desktop section.
 
Status
Not open for further replies.
Back
Top