Contribute
Register

Haswell early reboot, Mavericks, locked MSRs, and HP Envy 15-J063CL (i7-4700MQ)

Status
Not open for further replies.
there you go, thank you for helping, will try other platform ids
UPDDATED
Yes forgot -x -f!!!

HDMI is not starting up, seems like vesa boot on the hd 4600.
(works fine in win8x64)

In your second ioreg with "-f", I can see that AppleIntelFramebufferAzul is not present/complete in your /S/L/E. You can't expect to make Azul graphics work without the driver.
 
Please put detailed specs into your profile. My configuration/process is completely described in post #1.

Did that earlier today, something must have cocked it up.

Could have been that i cocked that up as well so did a fresh install of 10.9 today and here is a new ioreg:

Did the Mac Book pro 8,1 this time.

AppleIntelFramebufferAzul.kext is present in the folder, on my new installation.
Do i have to load it somehow?

thank you for your help, its realy appreciated.
 

Attachments

  • HP Envy 15 j008oe.ioreg
    2.3 MB · Views: 165
Did that earlier today, something must have cocked it up.

Could have been that i cocked that up as well so did a fresh install of 10.9 today and here is a new ioreg:

Did the Mac Book pro 8,1 this time.

AppleIntelFramebufferAzul.kext is present in the folder, on my new installation.
Do i have to load it somehow?

thank you for your help, its realy appreciated.

Kexts are directories. You have a AppleIntelFramebufferAzul.kext directory there, but the contents of it are incomplete.
 
Kexts are directories. You have a AppleIntelFramebufferAzul.kext directory there, but the contents of it are incomplete.


Ok, mildly baffeld.., could you guide on something to read up on or change?
 
Ok, mildly baffeld.., could you guide on something to read up on or change?

That situation usually results if you delete various kexts from /S/L/E on the installer USB in order to get the installer working. If you've saved a copy of them before removing them, just restore from your backup.
 
That situation usually results if you delete various kexts from /S/L/E on the installer USB in order to get the installer working. If you've saved a copy of them before removing them, just restore from your backup.

Ok, removed nothing??
So you mean i should start removing kexts from the usb installer?

Ran the Unibeast, patched your mach_kernel and it ran!

thx again for your help.
 
Ok, removed nothing??
So you mean i should start removing kexts from the usb installer?

No, I'm saying that is usually the cause of not having a valid install.

Ran the Unibeast, patched your mach_kernel and it ran!

thx again for your help.

With your Unibeast USB plugged in, what is the output of:
Code:
# in Terminal, assuming USB is called Installer
ls -lR /Volumes/Installer/System/Library/Extensions/AppleIntelFramebufferAzul.kext
 
No, I'm saying that is usually the cause of not having a valid install.
With your Unibeast USB plugged in, what is the output of:
Code:
# in Terminal, assuming USB is called Installer
ls -lR /Volumes/Installer/System/Library/Extensions/AppleIntelFramebufferAzul.kext
it says:

total 0
drwxr-xr-x@ 6 dild staff etc.......(date of build)
 
it says:
FramebufferAzul.kext
total 0
drwxr-xr-x@ 6 dild staff etc.......(date of build)

You really should use copy/paste.

But it sounds like you have an empty directory. You will need to restore the kext in order to utilize your graphics chip.
 
You really should use copy/paste.

But it sounds like you have an empty directory. You will need to restore the kext in order to utilize your graphics chip.

yep i know...
Risk of starting over on posts.

Restore it from where, the 10.9 installer?
lot of the files on the usb installer in the s/l/e folder are invisible???
 
Status
Not open for further replies.
Back
Top