Contribute
Register

[Success] Mavericks on ASUS p8p67 EVO - Overclocked 4.2Ghz i7 2600k - GTX 560ti

Status
Not open for further replies.
Joined
Feb 13, 2012
Messages
40
Motherboard
10.7.4
CPU
2600K i7
Graphics
560ti
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
Screen%20Shot%202013-11-10%20at%204.01.30%20PM.jpg

Warning!!!
This is what worked for me... I'm typing on it now... but saying that, I'm not responsible for any damaged caused by this thread. We are flashing BIOS which can be hazardous! If we don't flash BIOS, sleep won't work without sleep kexts.

PREPRODUCTION
download Unibeast
follow tonymac instructions for installing unibeast on usb
download and add "Multibeast - Mavericks" to usb - http://www.tonymacx86.com/downloads.php?do=cat&id=3
download, unzip, add DSDT to usb (attached to this post)
download, unzip, add RevoGirl's Modded P8P67-EVO-ASUS-2302_modified to usb (attached to this post)(MAKE SURE YOUR NORMAL BIOS VERSION IS 2302!!!!!!!!!!!)
reboot

BIOS
enter BIOS (press delete)

1hhG17woMQGhLpcI8z5X3rQXgchRtgff1zCZWeIgK9I





flash BIOS to RevoGirl Modded P8P67-EVO-ASUS-2302.ROM (it might reboot afterwards, enter back into BIOS)

O7pjzXBSeTC6E_XMbZCvWK2CB8zfpUVqggWYdur9x6c





optimized defaults (F5)
go to advanced mode (top right)
ai tweaker/turbo ratio/by per core (set each core to 42)
ai tweaker/internal PLL overvoltage/disable
ai tweaker/memory frequency/1600mhz (whatever yours is)

nN4Re27-t5DlmyoCsalOTGKCRnCZWMhnBKzwOHH97Lk





advanced/cpu configuration/cpu c1e/enabled
advanced/cpu configuration/cpu c3 report/enabled
advanced/cpu configuration/cpu c6 report/enabled

arCUU2334Ipno3nJkHf_U7qrlDM-fOs2FqvnMNCpOww





advanced/sata configuration/sata mode/AHCI mode

26dlV8B4E9IQWK1wZI7y3Je6LXKKrk8NcWOLjrUrQAI





boot/wait for 'f1' if error/disable
boot/option rom messages/keep current
boot/boot priority #1/[your about-to-be-created mavericks hard drive] (not unibeast)
exit and save changes

DSSFvQ77Hxwxa2YCAl07ME6xmtc_edWHrcBTIXZGB3o





UNIBEAST
boot from unibeast disk (F8 during asus boot screen)
clear target disk using disk utility (skip this if you’re just updating)
install mavericks to target disk
should restart afterwards
still boot from usb
at boot loader screen select new maverick’s disk & add -f -v GraphicsEnabler=Yes

MULTIBEAST
quick start/userDSDT (select DSDT on usb)
drivers/audio/realtek alcxxx/with dsdt/ALC892
drivers/disk/trim enabler/10.9.0 TRIM Patch (if ssd)
drivers/misc/fakesmc plugins & HWMonitor app
drivers/network/hnak's AppleIntelE1000e.kext & Lnx2Mac RealtekRTL81xx (nevermind)
drivers/system/patched appleintelcpupowermanagement/OS X 10.9.0 (deletes nullcpupowermanagement)(if reboot you get p-state error, try -f or UseKernelCache=No, if nothing still, re-install drivers/misc/nullcpupowermanagement to boot)
customize/boot options/GraphicsEnabler=Yes & verbose boot
customize/ssdt options/sandy bridge core i5/i7 overclocked
build/select hard drive/install
reboot
done



EXTRAS

fixfreeze (if your computer freezes randomly)(works on Mavericks) - http://www.tonymacx86.com/mountain-...ermi-freeze-back-latest-drivers-10-8-3-a.html

Get iCloud, FaceTime, Messages to work
download "Chameleon Wizard" - http://www.insanelymac.com/forum/topic/257464-chameleon-wizard-utility-for-chameleon/
from chameleon wizard install FileNVRAM.dylib to /Extra/Modules folder (make sure “Modules” is Capitalized, IMPORTANT!!!)
delete all network interfaces in System Prefs (minus button)
delete /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
reboot
make new network interface and call it “en0” (zero)
 

Attachments

  • DSDT.aml.zip
    14.2 KB · Views: 628
  • P8P67-EVO-ASUS-2302_modified.zip
    2.4 MB · Views: 545
Hello! I'am Install Macintosh 10.9 Mavericks.

Available:

1. Installed Macintosh OSX 10.9.
2. Motherboard ASUS P8P67 EVO.
3. CPU Intel Xeon E3-1230 3.2 GHz.
4. Graphics Card Nvidia GTX 560.
5. Memory Crucial 16Gb 7.7.7.20 1600 MHz, 4 Modules.
6. Your Modified Bios Version 3202

Please tell me which one is better to install the boot under this configuration?

Options:

1. Chamelion
2. Clover (With support for EFI)

Really looking forward to your advice!

Please write url's for bootloader's version downloads!

Sorry for my english :)
 
Screen%20Shot%202013-11-10%20at%204.01.30%20PM.jpg

Warning!!!
This is what worked for me... I'm typing on it now... but saying that, I'm not responsible for any damaged caused by this thread. We are flashing BIOS which can be hazardous! If we don't flash BIOS, sleep won't work without sleep kexts.

PREPRODUCTION
download Unibeast
follow tonymac instructions for installing unibeast on usb
download and add "Multibeast - Mavericks" to usb - http://www.tonymacx86.com/downloads.php?do=cat&id=3
download, unzip, add DSDT to usb (attached to this post)
download, unzip, add RevoGirl's Modded P8P67-EVO-ASUS-2302_modified to usb (attached to this post)(MAKE SURE YOUR NORMAL BIOS VERSION IS 2302!!!!!!!!!!!)
reboot

BIOS
enter BIOS (press delete)

1hhG17woMQGhLpcI8z5X3rQXgchRtgff1zCZWeIgK9I





flash BIOS to RevoGirl Modded P8P67-EVO-ASUS-2302.ROM (it might reboot afterwards, enter back into BIOS)

O7pjzXBSeTC6E_XMbZCvWK2CB8zfpUVqggWYdur9x6c





optimized defaults (F5)
go to advanced mode (top right)
ai tweaker/turbo ratio/by per core (set each core to 42)
ai tweaker/internal PLL overvoltage/disable
ai tweaker/memory frequency/1600mhz (whatever yours is)

nN4Re27-t5DlmyoCsalOTGKCRnCZWMhnBKzwOHH97Lk





advanced/cpu configuration/cpu c1e/enabled
advanced/cpu configuration/cpu c3 report/enabled
advanced/cpu configuration/cpu c6 report/enabled

arCUU2334Ipno3nJkHf_U7qrlDM-fOs2FqvnMNCpOww





advanced/sata configuration/sata mode/AHCI mode

26dlV8B4E9IQWK1wZI7y3Je6LXKKrk8NcWOLjrUrQAI





boot/wait for 'f1' if error/disable
boot/option rom messages/keep current
boot/boot priority #1/[your about-to-be-created mavericks hard drive] (not unibeast)
exit and save changes

DSSFvQ77Hxwxa2YCAl07ME6xmtc_edWHrcBTIXZGB3o





UNIBEAST
boot from unibeast disk (F8 during asus boot screen)
clear target disk using disk utility (skip this if you’re just updating)
install mavericks to target disk
should restart afterwards
still boot from usb
at boot loader screen select new maverick’s disk & add -f -v GraphicsEnabler=Yes

MULTIBEAST
quick start/userDSDT (select DSDT on usb)
drivers/audio/realtek alcxxx/with dsdt/ALC892
drivers/disk/trim enabler/10.9.0 TRIM Patch (if ssd)
drivers/misc/fakesmc plugins & HWMonitor app
drivers/network/hnak's AppleIntelE1000e.kext & Lnx2Mac RealtekRTL81xx (nevermind)
drivers/system/patched appleintelcpupowermanagement/OS X 10.9.0 (deletes nullcpupowermanagement)(if reboot you get p-state error, try -f or UseKernelCache=No, if nothing still, re-install drivers/misc/nullcpupowermanagement to boot)
customize/boot options/GraphicsEnabler=Yes & verbose boot
customize/ssdt options/sandy bridge core i5/i7 overclocked
build/select hard drive/install
reboot
done



EXTRAS

fixfreeze (if your computer freezes randomly)(works on Mavericks) - http://www.tonymacx86.com/mountain-...ermi-freeze-back-latest-drivers-10-8-3-a.html

Get iCloud, FaceTime, Messages to work
download "Chameleon Wizard" - http://www.insanelymac.com/forum/topic/257464-chameleon-wizard-utility-for-chameleon/
from chameleon wizard install FileNVRAM.dylib to /Extra/Modules folder (make sure “Modules” is Capitalized, IMPORTANT!!!)
delete all network interfaces in System Prefs (minus button)
delete /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
reboot
make new network interface and call it “en0” (zero)
So, I have basically the same setup except I have an EVGA 750ti SC. Are there any special modifications i would need to do?
 
Status
Not open for further replies.
Back
Top