- Joined
- Sep 17, 2011
- Messages
- 58
- Motherboard
- Mavericks 10.9, Mt Lion 10.8, Lion 10.7.4
- CPU
- i5 2500K x 3
- Graphics
- Radeon HD 6xxx
- Mac
- Classic Mac
- Mobile Phone
SUCCESS: GA-Z86X-UD3H-B3 Mavericks 10.9 ATI 6xxx w Dual Monitors
1. Download Unibeast, Multibeast, DSDT, and KextBeast from Tonymac. Download Mavericks from App Store
2. Use Unibeast to create USB installer
3. Print any guides to PDF and save to USB. Copy Multibeast to USB. Searched current installation for ATI6000Controller.kext and copied to USB.
4. Used SuperDuper! to clone current installation to separate hard drive.
5. Shut Down, disconnect power and pull Graphics Card. Use board DVI port w single monitor.
6. Use USB to boot into installation. **Use safe mode boot flag -x**
7. Utilities> Disk Utility. Partitioned HD and renamed. Make sure to format w GUID
8. Run install.
9. Reboot continuing to **USE SAFE MODE BOOT FLAG**
10. Run Mulitbeast. Running bios F11; placed proper DSDT on desktop and pointed to. Selected the following options
Audio>Realtek ALCxxx>With DSDT>ALC889
Disk>NONE
Graphics>NONE
Misc>FakeSMC v5.3.820, FakeSMC plugins, FakeSMC, HWMonitor, USB 3.0
Network>Realtek-Lnx2Mac
Chimera v 2.2.1
Boot Options>Hibernate Mode - Desktop, Verbose Boot
SSDT Options>Sandy Bridge Core i5
11. Reboot in Safe Mode (-x). I was not able to boot without the safe mode boot flag. The system would boot without hanging but would load a white screen and I would be unable to login.
12. Using KextBeast, install ATI6000Controller.kext
13. Shutdown, pull power and install ATI card
14. Used top DVI port and Display port with DVI converter
15. Boot, Welcome to Mavericks
1. Download Unibeast, Multibeast, DSDT, and KextBeast from Tonymac. Download Mavericks from App Store
2. Use Unibeast to create USB installer
3. Print any guides to PDF and save to USB. Copy Multibeast to USB. Searched current installation for ATI6000Controller.kext and copied to USB.
4. Used SuperDuper! to clone current installation to separate hard drive.
5. Shut Down, disconnect power and pull Graphics Card. Use board DVI port w single monitor.
6. Use USB to boot into installation. **Use safe mode boot flag -x**
7. Utilities> Disk Utility. Partitioned HD and renamed. Make sure to format w GUID
8. Run install.
9. Reboot continuing to **USE SAFE MODE BOOT FLAG**
10. Run Mulitbeast. Running bios F11; placed proper DSDT on desktop and pointed to. Selected the following options
Audio>Realtek ALCxxx>With DSDT>ALC889
Disk>NONE
Graphics>NONE
Misc>FakeSMC v5.3.820, FakeSMC plugins, FakeSMC, HWMonitor, USB 3.0
Network>Realtek-Lnx2Mac
Chimera v 2.2.1
Boot Options>Hibernate Mode - Desktop, Verbose Boot
SSDT Options>Sandy Bridge Core i5
11. Reboot in Safe Mode (-x). I was not able to boot without the safe mode boot flag. The system would boot without hanging but would load a white screen and I would be unable to login.
12. Using KextBeast, install ATI6000Controller.kext
13. Shutdown, pull power and install ATI card
14. Used top DVI port and Display port with DVI converter
15. Boot, Welcome to Mavericks