GA-Z77X-UP5-TH with i7-3770K + HD 4000 onboard
Corsair Vengence Ram, running at 2133 (CMZ8GX3M2X21339R), 8 gigs, 500 watt PC Power and Cooling PS
Seagate 1TB Solid State Hybrid Drive SATA 6Gbps 64MB Cache 2.5-Inch ST1000LM014
BitFenix Shinobi all white case, with window (all internal wiring loomed with white paracord)
Original clean install from Unibeast with downloaded 10.8.3, REQUIRED -X Terminal command argument
(safe mode) to boot to desktop for installation of Multibeast. The following Multibeast settings were used and installed:
UserDSDT or DSDT-free installation checked.
AUDIO DRIVER: WITHOUT DSDT: ALC898 checked.
DISK (3RD PARTY INTERNAL SATA) checked, Marvell 6g controller shows in System Information.
NETWORK:hnak's AppleIntel1000e Ethernet checked.
Customization: MacMini 6.2 checked.
Drive would not boot after Multibeast install because of 4k block error (Boot0 error)
Used Terminal command fix as noted by MacMan with one addition, (the word Volume), as directory
could not be found without this word be added to the terminal command, so that boot code
can be properly written to drive to allow unassisted booting.
Downloaded 10.8.4 combo updater from Apple's site. Did not check download's hash as I normally do,
just went for it. Installed, did not respond to reboot request after completion, opened Multibeast 5.3.1 and applied the
following again before I rebooted:
Same sound driver ALC898 without DSDT; did not check UserDSDT or DSDT-free installation.
Same 3rd party SATA driver (probably not needed.)
BTW added Trim patch 10.8.3 (I guess, also 10.8.4), as Windows drive, when added, will be Samsung 840 SSD with MacDrive installed
and Paragon's NTFS for Mac, will be added to 10.8.4, after Windows 7 Ultimate install on 840, is completed.
Nothing else. Upon reboot Chimera still displayed Mountain Lion 10.8.3 at bootup screen.
Rebooted perfectly and sound and network working perfectly. App Store works and Imessage.
Do not have a wifi card installed to test as of yet.
2nd reboot Chimera displayed 10.8.4.