Contribute
Register

GIGABYTE GA-Z77X-UP5 TH Thunderbolt (Updated to 10.8.2 and MultiBeast 5.2)

Status
Not open for further replies.
the gray screen with the apple can last long enough
must waited a little, especially when you start on usb it may take time
if you did as I have explained it to work
I tested on my machine

Hmm...Well I don't know what to do then. I let it run for about 30 minutes and nothing has happened. Thanks for helping though, I appreciate it.
 
Hmm...Well I don't know what to do then. I let it run for about 30 minutes and nothing has happened. Thanks for helping though, I appreciate it.
30 minutes is too long, ca should take 1 or 2 minutes


again your USB key with unibeast
and verifies your bios setting


if you follow my instructions and you put the extra folder that I gave you this has worked
 
Ok. I'm not sure exactly how but I am able to boot into ML from my ssd! The only thing is I don't have audio and I can't get my gpu to work (GTX 670). Any ideas? I'll keep looking around the forums though. thanks!
 
Ok. I'm not sure exactly how but I am able to boot into ML from my ssd! The only thing is I don't have audio and I can't get my gpu to work (GTX 670). Any ideas? I'll keep looking around the forums though. thanks!
what is the problem with the video card specifically
graphicsenabler and No in the org.chameleon.boot plist?

Sans titre - copie.jpg
 
what is the problem with the video card specifically
graphicsenablé and No in the org.chameleon.boot plist?

View attachment 57677
I got the graphics card working by changing some of the BIOS around. But I do not have audio. I tried checking the ALC898 but when I do, the computer won't boot up. And is there anything I can do to get the wifi working or do I have to buy a separate wifi card? thanks.
 
I got the graphics card working by changing some of the BIOS around. But I do not have audio. I tried checking the ALC898 but when I do, the computer won't boot up. And is there anything I can do to get the wifi working or do I have to buy a separate wifi card? thanks.
the wireless card included with the motherboard does not work there either buy compatible wireless card and change the pcie card or buy a PCIe card that works

it's really weird to put your system ALC898 should not prevent the computer from starting .......
 
So I just retried installing the ALC898 audio and it worked however my monitor's built in speakers aren't working.
maybe you are not in the correct connector to the rear of the computer test the different colors connector, green, yellow, black ...........
also check the audio setting for mac os if it is set on the right thing


or if you want to not break your head buy a mini usb adapter, mini audio jack you will not need to put kexts it will work automatically selecting USB in audio preference
 
Sounds to me like you're having problems with the built-in graphics, as well as maybe BIOS settings..?

You need to add the HD 4000 graphics injector string before it can boot properly via HDMI or Thunderbolt-to-HDMI.
 
Previous message:
..."Updated my system to 10.8.4 reinstalled Multibeast folowing everything that's in Alfa's guide and also activated HD4000 once again. after restarting(after multibeast and the HD4000) i noticed a few error codes on my boot loader(after choosing my mac os). Just install the latest CHAMELEON and it'll be gone."

Thanks for the response, but how do I update my system to 10.8.4 if I can't even get 10.8.3 working?

What I really need is full instructions for a clean installation to either 10.8.3 or 10.8.4.

Either that, or someone to buy my system. The dust on it comes at no extra charge.

R
 
Status
Not open for further replies.
Back
Top