Contribute
Register

Gigabyte is working on UEFI-BIOS for Z68 & P67 (no 3D)

Status
Not open for further replies.
If you are using nvidia gpu use GraphicsEnabler=No or PCIRootUID=0

Hey

Tahnks, I am pretty sure that I do it yesterday but maybe I doing wrong :)
After night I try once again in morning with PCIRootUID=0 and it goes :)
Thanks

But after instalation I have problem with shutdown and restart ( I know that sleep dont work )
I use multibeast and check dsdt free without dsdt on first time and didnt check Fake SMC but shutdwon some times work sometimes not.
Later I add FAKE SMC etc and its the same
Do you know about this problem with shutdown or restart ?

Tahnks
Tomek
 
Hey

Tahnks, I am pretty sure that I do it yesterday but maybe I doing wrong :)
After night I try once again in morning with PCIRootUID=0 and it goes :)
Thanks

But after instalation I have problem with shutdown and restart ( I know that sleep dont work )
I use multibeast and check dsdt free without dsdt on first time and didnt check Fake SMC but shutdwon some times work sometimes not.
Later I add FAKE SMC etc and its the same
Do you know about this problem with shutdown or restart ?

Tahnks
Tomek

Some of the changes with UEFI BIOS included PCI-E 3.0 support. One of the many changes with PCI slot support. Try PCIRootUID=0 as stated. This may work with your card. But you will have to try different things based on your card. This is your problem with the black screen, and is graphics card based.

You need to run MultiBeast with DSDT-Free Install. Read the description of what this installs when you click on it! You may need to remove kernel boot flag NCPIx3000 from your org.chameleon.boot.plist. Also in MultiBeast is the PCI Root UID fix but you need to change the =1 to =0 (if it works for you).
 
Hi

I just upgraded bios to uefi on Z68X-UD4-B3 and i cant install MT Lion
Probably wrong bios setings
Can you advice me how to setup bios to install with unibest ?
Thank you

Best
Tomek

Hi Losiak,

My Z68XP-UD4 UEFI BIOS U1L with Intel i7-3770K, both shut down and sleep, or wakeup from sleep all worked fine.

Make sure you create a bootable USBstick to flash the MB BIOS correctly.

Use UniBeast 1.7.0.pkg & Install OS X Mountain Lion.app v10.8.3 to create the USB installer disk.

Change PCIRootUID to 0 in USB/Extra/org.chameleon.Boot.plist

Don't use any DSDT file.

Run MultiBeast 5.2.1.pkg only check:
• UserDSDT or DSDT-Free Installation
• FakeSMC Plugins - Both Plugins & HWMonitor Application
• Realtek - Lnx2Mac's RealtekRTL81xx v0.0.90

Run MultiBeast 5.3.0.pkg only check:
• ALC889 in Audio Without DSDT

Get UUID / GUID from here, check Generate UUIDs in uppercase:
http://www.famkruithof.net/uuid/uuidgen

Add into org.chameleon.Boot.plist:
<key>SystemId</key>
<string>your unique UUID</string>

Change these in smbios.plist:
<key>SMserial</key>
<string>G88xxxxx5J4</string> -- change x to any number
<key>SMbiosversion</key>
<string>MP31.88Z.00C1.B00.080209154</string>

Run in Terminal to turn off Hibernation:
sudo pmset -a hibernatemode 0
sudo rm -f /var/vm/sleepimage


Z68XP-UD4 UEFI BIOS U1L
▶ MB Inteligent Tweaker
▶ Advanced Frequency Settings
• CPU/PCIe Base Clock - • Auto
• Processor Graphics Clock - • Auto
• CPU Clock Ratio - • 35
▶ Advanced CPU Core Features
• CPU Clock Ratio - • 35
• Internal CPU PLL Overvoltage - • Auto
• Intel Turbo Boost Technology - • Auto
Turbo Ratio (1-Core Active) - • Auto
Turbo Ratio (2-Core Active) - • Auto
Turbo Ratio (3-Core Active) - • Auto
Turbo Ratio (4-Core Active) - • Auto
• Turbo Power Limit (Watts) - • Auto
• Core Current Limit (Amps) - • Auto
• CPU Core Enabled - • Auto
• Hyper-Threading Technology - • Auto
• CPU Enhanced Halt (C1E) - • Auto
• C3/C6 State Support - • Auto
• CPU Thermal Monitor - • Auto
• CPU EIST Function - • Auto
• Extreme Memory Profile (X.M.P.) - √ Profile1
• System Memory Multiplier (SPD) - • Auto
▶ Advanced Memory Settings
• Extreme Memory Profile (XMP) - √ Profile1
• System Memory Multiplier (SPD) - • Auto
• Performance Enhance - • Turbo
• DRAM Timing Selectable (SPD) - • Auto
• Channel Interleaving - • Auto
• Rank Interleaving - • Auto
▶ PC Health Status
• Reset Case Open Status - • Disabled
• CPU Warning Temperature - • Disabled
• CPU FAN Fail Warning - • Disabled
• System FAN2 Fail Warning - • Disabled
• Power FAN Fail Warning - • Disabled
• System FAN1 Fail Warning - • Disabled
• CPU FAN Control Mode - • Auto
• CPU FAN Speed Control - √ Manual
• Slope PWM - √ 1.25 PWM/°C
▶ Miscellaneous Settings
• PEG-GenX - • Auto
• 3D Mark01 Boost - • Disabled
▶ BIOS Features
• Boot Option Priorities
• Boot Option #1 - √ P0:INTEL SSD
• Hard Drive BBS Priorities - • P0:INTEL SSD
• Bootup NumLock State - • Enabled
• Full Screen LOGO Show - • Enabled
• Fast Boot - • Disabled
• Limit CPUID Maximum - • Disabled
• Execute Disable Bit - • Enabled
• Intel Virtualization Tech - • Disabled
• OS Type - • Other OS
• Boot Mode Selection - • UEFI and Legacy
• LAN PXE Boot - • Disabled
• Storage Boot Option - • Legacy Only
• Other PCI ROM - • UEFI OpROM
• Network Stack - • Disabled
▶ Peripherals
• VIA 1394 Controller - x Disabled
• SATA Controller - • Enabled
• SATA Mode Selection - √ AHCI
• USB2.0 Controller - • Enabled
• Audio Controller - • Enabled
• Init Display First - √ PEG
• Internal Graphics - • Auto
• Internal Graphics Memory - • 64M
• DVMT Total Memory Size - • MAX
• Intel Rapid Start Technology - • Disabled
• Legacy USB Support - • Enabled
• XHCI Hand-off - • Enabled
• EHCI Hand-off - • Disabled
• Port 60/64 Emulation - • Disabled
• USB Storage Devices
• OnBoard USB3 Controller #1 - x Disabled
• OnBoard USB3 Controller #2 - x Disabled
• Onboard LAN Controller - • Enabled
• Super IO Serial Port - • Enabled
• Intel Smart Connect Tech - • Disabled
• Marvell ATA Controller #1 - x Disabled
• Marvell ATA Controller #2 - x Disabled
▶ Power Management Setup
• Resume by Alarm - • Disabled
• ErP - • Disabled
• High Precision Event Timer - • Enabled
• Soft-Off by PWR-BTTN - • Instant-Off
• IGPU Standby Mode - • Enabled
• IGPU Deep Standby Mode - • Enabled
• AC Back Function - √ Always On
• Power On By Mouse - • Disabled
• Power On By Keyboard - • Disabled
 
Hi,

I just reg. to ask is there a eufi for z68x-ud7?

Because I saw in first post that they making one for that MB, but I can't find it.
 
Hi Bro I Have Ga-z68x-ud7-b3 rev1.0 bios f10, i7 2600k processors and ATI 6870 ddr5 1gb Graphics cord there.
i am following 1).German Gigabyte-Forum
and
2)http://forums.tweaktown.com/gigabyte/28 ... post430392 this ones but i am don't get UEFI Bios ,get this !!! fixture is not removed or switch is not set to on press any key to exit!!!
what are doing me?

any one help me bro plz
 
Status
Not open for further replies.
Back
Top