Audio not working on Gigabyte x79-up4??

[toleda]

I think i did it

Audio is not working at all. Delete S/L/E/HDAEnabler1.kext.
Install MultiBeast 4.6.1/Drivers & Bootloaders/Kexts & Enablers/Audio/Realtek ALC8xx/Non-DSDT Enabler/ALC892.
Restart and reply with a copy of IOReg.

 

[Noobofallnoobs]

Audio is not working at all. Delete S/L/E/HDAEnabler1.kext.
Install MultiBeast 4.6.1/Drivers & Bootloaders/Kexts & Enablers/Audio/Realtek ALC8xx/Non-DSDT Enabler/ALC892.
Restart and reply with a copy of IOReg.

Ioreg

 

[Noobofallnoobs]

Edit:

Thankyouuuuuuuu sooooo Much.. The audio is finally working.

 

[toleda]

The audio is finally working.

For screenshots describing SysPref settings and audio jack configurations, download opt_alc892_audio_screenshots.pdf at the end of Post #1 in Optimized AppleHDA for Realtek ALC 892 on Lion - Update.

 

[Longcat]

Hi guys,

I'm also on the GA x79-UP4 and, unfortunately, am also having issues with the audio very similar to what has been described here.

I'd be exceptionally grateful if one of you could share with me what it took to get the audio working on this board.

Cheers.

 

[toleda]

I'm also on the GA x79-UP4 and, unfortunately, am also having issues with the audio very similar to what has been described here.

All the answers are in this post:
Solution, see Post #2
Enabler, if no dsdt, see Post #11
Problems, see Post #6

 

[Longcat]

Ah, I was trying to use the interim solution with MultiBeast 5.2.1. I tried with 4.6.1 and it finally works.

Thankyou so much Toleda, you're my favorite person in the world right now!

 

[rdur]

I am stumped. I had the same issue, used the "Interim" fix with MultiBeast 4.6.1 and the audio still did not work. I discovered, however, that when I boot with -f at startup, the audio does work. Can anyone help me with this one? Am I doomed to continue booting with -f to get the audio to work?

Mountain Lion 10.8.2
Gigabyte GA-X79-UP4
3.5 Ghz Intel core i7

Many thanks.