[SUCCESS] Lion working 100% with CustoMac Mini 2011 Build

[zzrider]

I'm having some difficulties!

1. Boot is slower. No big deal, just annoying. Boots fine, otherwise.
2. After SEVERAL attempts... I can't get sound working. I'm using an optical audio cable out to a receiver.
3. Sleep doesn't work... on command or by time. It puts the drives to sleep, but the fans still run. It then won't wake back up.

Other than that it runs fine. Ethernet, video, nice and speedy etc.

Specs:
h67n gigabyte mobo
i5 2500k
64gb ssd boot
2 x 1tb storage drives
8gb ram
10.8.2

10.7.4 I had everything running perfect. Sleep was working and everything. It performed just like my iMac, only better spec'd. May just revert back if this won't stabilize soon...

Any ideas would be greatly appreciated!

 

[Daviderr]

I'm having some difficulties!

1. Boot is slower. No big deal, just annoying. Boots fine, otherwise.
2. After SEVERAL attempts... I can't get sound working. I'm using an optical audio cable out to a receiver.
3. Sleep doesn't work... on command or by time. It puts the drives to sleep, but the fans still run. It then won't wake back up.

Other than that it runs fine. Ethernet, video, nice and speedy etc.

Specs:
h67n gigabyte mobo
i5 2500k
64gb ssd boot
2 x 1tb storage drives
8gb ram
10.8.2

10.7.4 I had everything running perfect. Sleep was working and everything. It performed just like my iMac, only better spec'd. May just revert back if this won't stabilize soon...

Any ideas would be greatly appreciated!

 

[santitf]

Hi. My h67n customacmini works perfect in ML with the HD3000.
I put a 5770 xvapor connect via displayport and works perfect. But when the system goes to sleep the system wakes but the monitor doesn't. I can access the system with another mac using screen sharing to reboot. Then the monitor works fine until system sleeps again.
In lion the same gpu works fine.
Any idea?

 

[PunkHop]

I just tried following the guide for updating mine from Lion to Mountain Lion. Got Unibeast to install 10.8 just fine, but then I ran MultiBeast with the settings provided and now I can't boot. I get this message on boot:

Loading Darwin 10.8
Loading kernel cache /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache
Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 4096 bytes.
Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 11792919 bytes.

And then it restarts. Tried -v -x -F -f UseKernelCache=No, nothing works.

If I do UseKernelCache=No, I get this:

Loading Darwin 10.8
Loading kernel mach_kernel
Read HFS+ file: [hd(0,2)/mach_kernel] 4896 bytes.
Read HFS+ file: [hd(0,2)/mach_kernel] 8188064 bytes.

Any ideas?

 

[santitf]

Hi. My h67n customacmini works perfect in ML with the HD3000.
I put a 5770 xvapor connect via displayport and works perfect. But when the system goes to sleep the system wakes but the monitor doesn't. I can access the system with another mac using screen sharing to reboot. Then the monitor works fine until system sleeps again.
In lion the same gpu works fine.
Any idea?

Finally, the problem was the dvi to hdmi wire: with the HD3000 I have no problem, but with the 5770 the monitor (Dell U2412M) never wake from sleep. Using a dvi to dvi cable fix the wake issue. And works too if I use and hdmi to hdmi wire with my sony TV.

 

[jateelover]

Did you ever figure this out? I have the same issue...

I just tried following the guide for updating mine from Lion to Mountain Lion. Got Unibeast to install 10.8 just fine, but then I ran MultiBeast with the settings provided and now I can't boot. I get this message on boot:

Loading Darwin 10.8
Loading kernel cache /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache
Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 4096 bytes.
Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 11792919 bytes.

And then it restarts. Tried -v -x -F -f UseKernelCache=No, nothing works.

If I do UseKernelCache=No, I get this:

Loading Darwin 10.8
Loading kernel mach_kernel
Read HFS+ file: [hd(0,2)/mach_kernel] 4896 bytes.
Read HFS+ file: [hd(0,2)/mach_kernel] 8188064 bytes.

Any ideas?

 

[santitf]

Finally, the problem was the dvi to hdmi wire: with the HD3000 I have no problem, but with the 5770 the monitor (Dell U2412M) never wake from sleep. Using a dvi to dvi cable fix the wake issue. And works too if I use and hdmi to hdmi wire with my sony TV.

Upgrade to 10.8.3 with the combo and never have the 5770 wake issue...