Contribute
Register

Asrock Z68 Extreme3 Gen3 - i7 2700K - 16g RAM - Very low GeekBench score (5600)

Status
Not open for further replies.
Joined
Nov 28, 2012
Messages
4
Motherboard
Asrock Z68 Extreme3 Gen3 - Bios 2.30
CPU
i7 - 2700K
Graphics
Intel 3000
Mac
  1. MacBook Pro
Classic Mac
  1. 0
Mobile Phone
  1. Android
  2. iOS
Hello everyone!
I am very new to hackint0sh.
Using all the great information on this site and going through the forum, I have managed to install ML 10.8.2 on my rig.
The exact specs are:

Asrock Z68 Extreme3 Gen3 (BIOS 2.30)
Intel i7 2700K
4x4gb RAM @1600
Intel 3000 onboard graphics
2xSamsung 830 SSDs

Using Unibeast/Multibeast and information from this thread I was able to (fairly easy tbh) install ML. (thanx MarkJohnson)
My DSDT settings are as follows:
"UserDSDT or DSDT-Free Installation"
Drivers and Bootloaders -->Drivers-->Audio-->Without DSDT-->ALC892 (always use without DSDT even if you have a DSDT)
Drivers and bootloaders --> Drivers ---> Network --> Realtek Gigabit Ethernet 2.0.6 for 10.7 (Lnx2Mac will work also)
Drivers and Bootloaders --> Drivers --> Disk --> IOAHCIBlockStorageInjector (so drives aren't marked as external)
Drivers and Bootloaders --> Drivers --> Disk --> Trim Enabler (for SSD)
Also I installed the "Patched AppleIntelCPUPowerManagement.kext for 10.8".

I rebooted and also checked the i7 SSDT from Multibeast.

Everything works fine, even the sleep/wake function. The problem is that my geekbench score is very very low, at 5500-5600. Even OC'ing the CPU to 4,2 and using the overclocked i7 SSDT did not make any difference whatsoever.

Any ideas?
 
If you have a Sandy Bridge processor, you need a SSDT. You can install that through MultiBeast.
 
If you have a Sandy Bridge processor, you need a SSDT. You can install that through MultiBeast.
You mean custom SSDT?
Because I have already tried both the default one and the OC'ed i7 one in Multibeast...
 
You mean custom SSDT?
Because I have already tried both the default one and the OC'ed i7 one in Multibeast...

Yes. That is only if you have a Sandy Bridge. If you do, then install the proper one and restart. Only run the overclocked SSDT if you have your cpu set to be overclocked. Your geekbench score should double.
 
Yes. That is only if you have a Sandy Bridge. If you do, then install the proper one and restart. Only run the overclocked SSDT if you have your cpu set to be overclocked. Your geekbench score should double.

Should I make one with revogirl's script?
 
I have only used the one from MultiBeast and it works great. I guess you can try.

I have already tried from Multibeast and it doesn't work...
 
Status
Not open for further replies.
Back
Top