- Joined
- Oct 23, 2012
- Messages
- 49
- Motherboard
- ASUS Z87-K
- CPU
- i7 4790 @ 3,6 GHz
- Graphics
- AREZ Strix Radeon RX VEGA56 OC
- Mac
- Mobile Phone
Hey you guys!
Finally, just finally I solved the iCloud and AppStore problem with the rev.1.1 MoBos H77/Z77 DS3H!
Right now (as we all know) the onboard AR8161 Ethernet is not supportet, so I just got the TG-3269 PCI Ethernet Card for about 15$ from Amazon. I just installed the RTL8169 driver (just google the kext, the one from MB 5.1.3 did not work for me) and changed my SMBIOS to iMac 12,1...do not use MacPro3.1 which is installed by default, it will not work with this SMBIOS!!
Side note: When using MacPro3.1 en1 won't ever change to en0, also do not use EFI Strings as it messes up the integrated Graphics (in my case the 4000 - I didn't try a GFX Card though)
Before you reboot, delete Ethernet and/or your Wlan Connection from System Preferences/Network
Reboot and add Ethernet at first!
(Then right after that add your WLAN)
PS: I have added the working kext in the attachments.
Of course you can also try other PCI Cards, but I just wanted to post this guide on how to enable AS and iC as this is a very cheap Ethernet card which you can get to work with few effort.
Enjoy your en0 xD
If you have questions, feel free to post them here into this thread
Have a nice day ya all
austrianhack
I've attached the kext for all the lazy ones ;P
Finally, just finally I solved the iCloud and AppStore problem with the rev.1.1 MoBos H77/Z77 DS3H!
Right now (as we all know) the onboard AR8161 Ethernet is not supportet, so I just got the TG-3269 PCI Ethernet Card for about 15$ from Amazon. I just installed the RTL8169 driver (just google the kext, the one from MB 5.1.3 did not work for me) and changed my SMBIOS to iMac 12,1...do not use MacPro3.1 which is installed by default, it will not work with this SMBIOS!!
Side note: When using MacPro3.1 en1 won't ever change to en0, also do not use EFI Strings as it messes up the integrated Graphics (in my case the 4000 - I didn't try a GFX Card though)
Before you reboot, delete Ethernet and/or your Wlan Connection from System Preferences/Network
Reboot and add Ethernet at first!
(Then right after that add your WLAN)
PS: I have added the working kext in the attachments.
Of course you can also try other PCI Cards, but I just wanted to post this guide on how to enable AS and iC as this is a very cheap Ethernet card which you can get to work with few effort.
Enjoy your en0 xD
If you have questions, feel free to post them here into this thread
Have a nice day ya all
austrianhack
I've attached the kext for all the lazy ones ;P