Gigabyte ga-z77x-ud3h / i5-3570k / HD4000 works except for Via sound

[joncas]

Hi,

"applehda" is the audio -- on this board the integrated audio chip doesn't currently work for OS-X

Did you select any of the audio drivers in Multibeast? Since they don't work, they should all remain unselected ...

 

[plur915]

Hi , i did jotbselect anything extra, i just used the settings you have on the image ,? Also when i set the pheroipherals settings and try to intall the mouse does'nt work along with keyboard once the installler loads , and tgat happens when i disable the 3.0 controller.. Do u have any other suggestion, or a very detailed gudie this is my my first build ever, but have used distros in the past.

 

[joncas]

when i set the pheroipherals settings and try to intall the mouse does'nt work along with keyboard once the installler loads , and tgat happens when i disable the 3.0 controller.

Hi,

I uploaded more detailed pictures of all the Bios settings to the beginning of this thread, and in the Multibeast settings, to reduce possible error sources, select only:
- "User DSDT / DSDT-free"
- maolj's Atheros Ethernet

If you plug the mouse and keyboard into one of the two usb 3.0 ports underneath the ethernet connector in the back, or if your case has usb 2.0 front panel connectors that go to the internal usb 2.0 connectors on the motherboard then use those.

Can you try a clean install with this?

 

[plur915]

Hi, Thank you for help .

I did a fresh install of with setting you recommend, exactly how you have them on you bios,I am only able to boot with me typing command "GraphicsEnabler=No",
Safe either -x mode does not boot either. The ram is set to 64MB on the bios, everything on the images i Followed. I Also added the graphics string right after I installed the Multibeast, right before i restarted. This is being done and Mountain Lion 10.8.0 Installer.

Intel HD4000 Show only 64MB, and NO Kext Loaded.

How can i get the HD4000 to get enabled in this case?


what can i do next

 

[plur915]

Hi, Once i boot with GE=No, I opened Multibeast went to Boot Options and Added PCI Root ID FIx and Use KernelCache, When I restarted It actually booted without any command, it didnt get stuck or anything just like normal boot, but still IntelHD is not enabled,

this is my plist

<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Graphics Mode</key>
<string>1680x1050x32</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>darkwake=0 PCIRootUID=1</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>UseKernelCache</key>
<string>Yes</string>
</dict>




Should i Add add Kernel Flag npci=0x2000 to enable the Intel HD 4000 Graphics? , were would i added in the .plist i have so far

 

[joncas]

If you have the possibility to download the 10.8.2 installer, maybe that could help?
Otherwise it is a mystery to me, because I have the exact same components as you and didn't have any of these problems...

 

[plur915]

I am downloading the 10.8.2 installer to builde a new USB Disk,,

Did you have to add the graphics string with new update ?

 

[joncas]

Did you have to add the graphics string with new update ?

Yes, still have to add the Graphics Mode, otherwise after the second reboot only the top half of the screen is active and displays a triplicate of the whole or some other undecipherable distortion, but the PCIRootUID shouldn't be needed, at least on my tests it works without ...

 

[joncas]

Here is a copy of my Bios settings -- if you uncompress the zip and copy the file onto a FAT-formatted usb-stick, you can load it into your Bios if it is the same F17 version on the GA-Z77X-UD3H, that way it would be sure to have identical settings to those that work on my machine. (After entering Bios, in the "Save & Exit" section -> Load Profiles -> Select File from HDD/USB)

 

[plur915]

Hi thank you for taking the time to upload new info and pics

I downloaded 10.8.2 made new usb, the bios profile is not able to load , but still copied all bios settings, after installing multibeast with dsdt/ fress dsdt and network only i restart and is still stuck at the apple logo , should i add the p ui uid? Or what?