Quick guide to configuring the UEFI on Gigabyte's 7-series LGA-1155 motherboards

[MacMan]

Article: Quick guide to configuring the UEFI on Gigabyte's 7-series LGA-1155 motherboards

http://download.gigabyte.us/FileList/BIOS/mb_bios_ga-z77x-up5-th_f11.exe

 

[khe91]

Article: Quick guide to configuring the UEFI on Gigabyte's 7-series LGA-1155 motherboards

http://download.gigabyte.us/FileList/BIOS/mb_bios_ga-z77x-up5-th_f11.exe

The link name says F11 but the downloaded file is F1 from 06/15/2012.

 

[khe91]

Article: Quick guide to configuring the UEFI on Gigabyte's 7-series LGA-1155 motherboards

VT-d is enabled on my Z77X-UP5 TH running 10.8.2 running F11

You are using a i7-3770K. K type of i7 don't have VT-d.
http://ark.intel.com/products/65523

So it makes no difference if you enable it in the BIOS, it's still always disabled.

 

[jamdox]

Article: Quick guide to configuring the UEFI on Gigabyte's 7-series LGA-1155 motherboards

Disabling "internal pll overvoltage" solved my sleep/wake problems.

http://www.tonymacx86.com/overclocking/70877-overclocking-kills-wake-sleep.html

 

[MacMan]

Article: Quick guide to configuring the UEFI on Gigabyte's 7-series LGA-1155 motherboards

The link name says F11 but the downloaded file is F1 from 06/15/2012.

Even though the file name say F1 it is F11 as I just checked in my UEFI settings.

You can always download it from the link posted on TweakTown.

 

[idsvmmcgraw]

Guys I could really use some help every time I restart my computer if it ever fully starts it needs to un corrupt the motherboard this takes about five minutes and then when that's over it boots into bios and no matter which flags I use I cannot get my costomac to the installer the motherboard is a Gigabyte z77x-Ud5h. please help

 

[xmarston]

Hello guys,
that's my problem:
My specs are i7 3770, Gigabyte H77-DS3h. I create the Mountain Lion boot in a Hard Drive, not USB(it could be the problem). For some reason I can see the Apple logo, few seconds later I can see the MAC pointer circling but that's it, the pointer spins infinitely.

 

[Mightee]

Article: Quick guide to configuring the UEFI on Gigabyte's 7-series LGA-1155 motherboards

Hello guys,
that's my problem:
My specs are i7 3770, Gigabyte H77-DS3h. I create the Mountain Lion boot in a Hard Drive, not USB(it could be the problem). For some reason I can see the Apple logo, few seconds later I can see the MAC pointer circling but that's it, the pointer spins infinitely.

Same problem on my i7 3770 / GA-Z77-DS3H. It popped up with 10.8.1, then went away in 10.8.2 but came back after the supplemental update. When it boots to that cursor, I can hit the reset button and it will boot normally. I can't figure out what's going on.

 

[xmarston]

Ok, I boot with -x option and its installed but... Why I have a wrong resolution? And I can't change it...

 

[xmarston]

All works fine but the sound, what could be the problem? I remember that my mobo is a GA H77-DS3H without sound card.