Contribute
Register

OS X 10.8.2 Update

Status
Not open for further replies.
Article: OS X 10.8.2 Update

scottphillips88 said:
LOST audio on Z77-DS3H and Ivy CPU. Everything else appears to be ok. Booted fine, and geek bench at 10,000 after update. (32 bit)

UPDATE: To get audio back on Z77-DS3H simply run multibeast and ONLY select ALC887/888B **CURRENT! Restart and then go into sound settings. Double click "Internal Speakers - Built In" under the output tab. Bingo AUDIO!
Click to expand...

I am getting the spinning wheel under the gray apple logo start up screen. Using UniBeast I am able to boot in the safe mode, but do not know what to change to fix the problem so I can get a normal boot.

Gigabyte Z77-DS3H 1155
Core i7 3770k
8GB DDR3 1600 MHZ
GTX 550Ti Graphics Card
1TB Seagate Barracuda 7200RPM HDD
 
Article: OS X 10.8.2 Update

Originally Posted by micr0shaft
You should download the edited AppleACPIPlatform.kext from my previous post boot up with -f -x put it on the desktop with Kextbeast and run it then reboot with -f.

::::FOR EVERYBODY::::

THIS METHOD HAS WORKED THROUGH ALL THE 10.8.2 BETAS AND WORKS 100% NOW

THIS FIXES THE OemSMBIOS PROBLEM WITHOUT HAVING TO DELETE IT FROM FAKESMC.kext

THIS MEANS YOU WON'T LOOSE YOUR SYSTEM DEFINITION AND SERIAL NUMBER WHICH WILL CAUSE PROBLEMS WITH SOME APPLE SOFTWARE AND ACTIVATED 3RD PARTY SOFTWARE.

IF YOU HAVE CONSTANT SPINNING WHEEL OR ARE RECEIVING ERRORS ABOUT OemSMBIOS.kext THIS WILL LIKELY FIX IT.

SOURCE:
http://www.insanlynac.com/forum/inde...post&p=1852962

benjenq said:
Great~ Thank you.
It fix all my issue on GA-Z77X-UP4 TH/ i7-3770/ AMD Radeon HD 6780。
Now I don't need to remove OemSMBIOS.kext and I can turn VT-d ON in BIOS setting. Everything works well as before after update to 10.8.2.
Click to expand...


For me this works as well, i just installed the combo update. When the update was done, (before rebooting) i used kextbeast with this AppleACPIPlatform.kext and did a system repair with Multibeast Lion edition. After this i reinstalled the Realtek 889 audio driver with the Multibeast Mountain Lion edition and rebooted my system without any other modifications without any problems! (have to reinstall my other hackintosh because of stupid store update without reading the post (RTFM?:p) but its not my priority hack, so that would be a reinstall....

specs:
GA-PH67A-D3-B3 (F4)
Core i5 2500k
Radeon HD6850
 
#1 On Mojave
Z77E-ITX |  i7 3770 |  GeForce GT 740
Article: OS X 10.8.2 Update

joesoes said:
Mine doesn't boot. It just keeps spinning with the apple logo and the white screen. I use GraphicsEnabler=no, but my keyboard dont work in MultiBeast boot (but it works in Bios).

What to do?
Click to expand...

did you try -x option?
 
Article: OS X 10.8.2 Update

Impossible said:
Originally Posted by micr0shaft
You should download the edited AppleACPIPlatform.kext from my previous post boot up with -f -x put it on the desktop with Kextbeast and run it then reboot with -f.

::::FOR EVERYBODY::::

THIS METHOD HAS WORKED THROUGH ALL THE 10.8.2 BETAS AND WORKS 100% NOW

THIS FIXES THE OemSMBIOS PROBLEM WITHOUT HAVING TO DELETE IT FROM FAKESMC.kext

THIS MEANS YOU WON'T LOOSE YOUR SYSTEM DEFINITION AND SERIAL NUMBER WHICH WILL CAUSE PROBLEMS WITH SOME APPLE SOFTWARE AND ACTIVATED 3RD PARTY SOFTWARE.

IF YOU HAVE CONSTANT SPINNING WHEEL OR ARE RECEIVING ERRORS ABOUT OemSMBIOS.kext THIS WILL LIKELY FIX IT.

SOURCE:
http://www.insanlynac.com/forum/inde...post&p=1852962




For me this works as well, i just installed the combo update. When the update was done, (before rebooting) i used kextbeast with this AppleACPIPlatform.kext and did a system repair with Multibeast Lion edition. After this i reinstalled the Realtek 889 audio driver with the Multibeast Mountain Lion edition and rebooted my system without any other modifications without any problems! (have to reinstall my other hackintosh because of stupid store update without reading the post (RTFM?:p) but its not my priority hack, so that would be a reinstall....

specs:
GA-PH67A-D3-B3 (F4)
Core i5 2500k
Radeon HD6850
Click to expand...


Link is broken? http://www.insanlynac.com/forum/inde...post&p=1852962
 
GA-Z77-DS3H, i7-3770, HD4000

Backed up.
Installed combo updater
Rebooted, ever spinning wheel.
Rebooted with -x, re-multi-beast
Rebooted, ever spinning wheel.
Rebooted with -x, re-installed AppleHDA & HDAEnabler1 kexts from http://www.tonymacx86.com/audio/67763-ml-optimized-realtek-applehda-preview-alpha.html
Rebooted, ever spinning wheel.
Rebooted with -x, installed ACPIPlatform kext from http://www.tonymacx86.com/mountain-lion-desktop-support/72956-10-8-2-problem.html
Rebooted - success
Audio ok.
Needed to rerun Trim Enabler.
 
My Z77X-UD5H with a GTX 670 updated without issue. After installing but before rebooting I reinstalled the audio driver and OpenCL enabler from MultiBeast and rebooted with no issue.

Best of luck to everyone else applying this update.
 
Hi everyone
downloaded combo update from http://support.apple.com/kb/DL1581
installed on
GA-Z77-DS3H
I5 3570K
RADEON 5770
without any issue except for the audio resolved by a re-patch from MultiBeast
 
for me all OK!

Backed up to external HDD.
Updated from 10.8.1 to 10.8.2 via Combo Update without any other preparation.
(First Installation was 10.8.1)
Remark: Intel VT-D in BIOS is ON.

Reboot. Then audio disabled. Run Multibeast to install Audiodrivers ALC887. Reboot.

System:
GA-Z77-DS3H
i5-3570K
Corsair 16GB (2x8GB)
HDD 1TB Seagate
MSI GTX560Ti 1GB

Thanks tonymacx86!
 
Article: OS X 10.8.2 Update

Ok, removed the oemSMBIOS.kext, which was not in the Fake thing but just in the directory. Rebooted. Works. Did multibeast, which was a little different for the mountain lion version but I picked The 889 with dsdt and we are happening again.

Question though, should I also enable fakesmc plugins like motherboard plugins and hwmonitor?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top