NVIDIA Releases Mountain Lion 10.8.1 Graphics Drivers

[thelostswede]

Looks like a fairly minor upgrade "Contains performance improvements and bug fixes for a wide range of applications." and as already mentioned, these drivers do not appear to have Kepler support :

 

[esmith1966]

Does this fix the multiple displays in portrait mode issue?

(using more than 2 monitors in portrait mode does not work...)

This is with using two graphic cards and 4 monitors all rotated to portrait mode.

 

[thelostswede]

Does this fix the multiple displays in portrait mode issue?

(using more than 2 monitors in portrait mode does not work...)

This is with using two graphic cards and 4 monitors all rotated to portrait mode.

I guess the only way to find out is to install them and try

 

[xxmacmanxx]

Installed with GT 430.

Works great. Sleep (including Deep Sleep), Resolution, Full-Screen. But I had a freeze.

And I need some help with another problem. I can only boot sometimes. Sometimes it stucks after the Apple logo at a black screen. Sometimes I does not. Fixed it by injecting my graphic card via DSDT, although it recognizes the graphic card fine if I boot into it and don't have a black screen. It has to be something with my MoBo I guess. Any help?

EDIT: OpenCL is broken for me too. The old terminal patch does not work anymore (No Substition made).

Greetings,
xxmacmanxx

 

[inactive-user]

1- Did you try monitor sleep 5 min and sleep 10 minutes instead of 1 minute?
2- Did you try force sleep (little apple menu >>> sleep)
3- Did you try any of above with pleasesleep.app
I think is too early to judge if it works or not, and that depends on board x58 z68 z77 etc
CPU 1156 or 1155 Ivy /Sandy bridge in all cases with NVIDIA FERMI cards, maybe one methos for sleep works and another don't...Because some people reported as succesful, just my two cents

1 YES - Monitor is No problem! works fine.
2 YES - Deep Sleep also works now. (But only if not over clocked in bios), so it's very important to not over clock, set the bios to default.
As soon i change the default BCLK "133" to " 150"in Bios to overclock i get: Monitor & CPU goes sleep, but by waking them up again. the CMOS resets, and i need to reboot.
3 YES - And other like apps.

As i said, the Monitor Off/On issues that i had before is gone, now it works.
Resolution change also works, no blue screen anymore.
So in other words, the Monitor Signal is good now and working.

What still is not working is "Deep Sleep" so that the Hackintosh completely goes to sleep Monitor & CPU.

 

[inactive-user]

1 YES - Monitor is No problem! works fine.
2 YES - Deep Sleep also works now. (But only if not over clocked in bios), so it's very important to not over clock, set the bios to default.
As soon i change the default BCLK "133" to " 150"in Bios to overclock i get: Monitor & CPU goes sleep, but by waking them up again. the CMOS resets, and i need to reboot.
3 YES - And other like apps.

As i said, the Monitor Off/On issues that i had before is gone, now it works.
Resolution change also works, no blue screen anymore.
So in other words, the Monitor Signal is good now and working.

What still is not working is "Deep Sleep" so that the Hackintosh completely goes to sleep Monitor & CPU.

So we should take a look why Deep Sleep is working with default bios settings, but not with Overclocked settings. Maybe SleepEnabler needs a Update!

 

[danmeyerphoto]

could you many give me some help? I can not get my second display to work on my GTX670..
primary display (HDMI)-works,
secondary display (VGA Adaptor to DVI) not working..
If i connect the secondary display while running it freezes everything. If restart and have it connected it show grey on the screen and then nothing and also then my main screen shows nothing.
I then have to reboot and unplug the secondary screen and the main screen works just fine again.. arrg.. I know it has to be a simple fix.

 

[sctyoon]

How can I enable OpenCL for this new driver?
Is there any solution for it?

 

[inactive-user]

How can I enable OpenCL for this new driver?
Is there any solution for it?

Delete the old kext 8 total, 4 geforce, and 4 nVidia, then install again latest drivers and repair permission in Disk Utility.

 

[sctyoon]

Delete the old kext 8 total, 4 geforce, and 4 nVidia, then install again latest drivers and repair permission in Disk Utility.

Tried it but no OpenCL yet.