Help me!!! Stuck at "pci configuration begin"

[speckdude]

So when i try to boot off the flash drive using "PCIRootUID=0" and "GraphicsEnabler=No" i get suck on "PCI configuration begin"

ASUS Sabertooth X79 TUF Edition
Intel Core i7-3930K
Lite-On iHBS11204 12x Internal Blu-Ray Burner
Corsair Dominator 32GB
Seagate Barracuda 1TB Hard Drive
OCZ vertex 120 GB Hard drive
Corsair CWCH80 Hydro H80
PNY Nvidia Gtx 680

Any suggestions? I have googled around a bit and found nothing so far.
Much appreciated,
Matt

 

[Mate94]

Try to boot with npci=x2000.

 

[JeffRH]

Try PCIRootUID=1 during boot up.

 

[speckdude]

Try to boot with npci=x2000.

Ok so now i have it installed, is it possible to add that line automatically at the beginning of each boot?

 

[alcanfane]

It will automatically adjust your GPU after the first running OSX. You no longer need it after that.

 

[Asus-Freak]

It will automatically adjust your GPU after the first running OSX. You no longer need it after that.

Nonsense!

 

[Asus-Freak]

Ok so now i have it installed, is it possible to add that line automatically at the beginning of each boot?

It should be injected when you run Multibeast. If not, add to it your org.chameleon.Boot.plist

 

[twiztidninja]

if you are not comfterbale adding to the boot plist yourself then theres an option in multibeast that will add it for you

 

[speckdude]

Alright, how do i add it to the org.chameleon.Boot.plist? Also it won't boot off the hard drive without me first typing in "GraphicsEnabler=no" also, sorry for needing all the help but its only the second computer iv hackentoshed and the first (on my laptop)when very very smoothly because there was a guide for the exact model.
Again thank you,
Matt

 

[owufail]

Hey new to hackintosh just like me, ands I feel that ill explain it for you. As I had the same issues as you when I did mine and got ridiculous replies.

Alright when you are on the desktop, your bar at the top should say Finder

1. Look to the right of Finder and find the Button "Go" (Or just use "Command + Shift + C" - Than skip to step 3.)

2. In the drop down list select "Computer"

3. Open the drive your OS X is installed to, for example ill use "Mountain Lion"

4. Head into the "Extra" folder

5. You will now see "org.chameleon.Boot.plist - Right click on it and select "Open"

6. Look in the file for "<key>GraphicsEnabler</key>"

7. The next line will show "<string>Yes</string>"

8. Change it to show "<string>No</string>"

9. In your bar at the top do File -> Save

10. Reboot

Congrats, tell me if this works or not if not ill show you how to make it use the Kernel Flag.