- Joined
- Feb 15, 2011
- Messages
- 13
- Motherboard
- P8Z68-V PRO
- CPU
- Intel 2600K
- Graphics
- Gygabyte GTX 1070 Minit OC
- Mobile Phone
[double post] Asus P8Z68-V PRO + NVIDIA 670 2G Windforce
Hi
This is a double post by mistake, it was not published when I send it so I created a new one.
You can find the latest in the following link:
http://www.tonymacx86.com/mountain-lion-desktop-support/61609-p8z68-v-pro-nvidia-670-works-but.html
SORRY !!!!
=================================================================
The following steps were my first impression and success with ML installation, but I did found some issues with the OS.
I reverted to booting from the USB so far, and wrote most of my issues and solution on the post stated above.
Navigate here: http://www.tonymacx86.com/mountain-lion-desktop-support/61609-p8z68-v-pro-nvidia-670-works-but.html
=================================================================
Here are the steps I did in order to install Mountain Lion (ML):
My Specs:
Motherboard: Asus P8Z68-V PRO
Bios Version: 1101
CPU: Intel i7 2600K
Memory: 4G
Graphic Card: NVIDIA 670 2G Gigabyte Windforce
Previous Version of OSX: Lion 10.7.4
Preparations:
1. Read the instruction on: tonymacx86.com - http://www.tonymacx86.com/downloads.php?do=file&id=119
2. Downloaded UniBeast 1.5 for ML + Latest Chimera (1.11.0) + Latest Multibeast.
3. Prepared 8G USB.
4. Bought ML from apple site (closed the installation window once it opened).
5. Execute the Unibeast 1.5, and pointed to the USB drive (went to sleep, it takes time )
Installation:
1. Boot into USB drive.
2. When the boot window displays, added the following options: "-v PCIRootUID=0 GraphicsEnabler=No"
This is due to me using Asus motherboard with NVIDIA 6xx graphic card that is not supported yet.
3. Once the installation screen appears follow the installation guide (I hope you prepared a partition for your installation). I installed on a clean partition and did not try to upgrade Lion 10.7.4, also it is always good to have an OSX backup system if something goes wrong.
4. Once installation finished, Boot again to your USB, but this time pick the "Partitioned" area you installed ML on it. I added the "-v" in order to see any Kernel Panic, but there were none.
5. After ML loaded with no issues, and with full HD resolution + Sound support (amazing isn't it) I tried to only install my DSDT.aml file for my motherboard without the other options from MultiBeast.
Now this is the tricky part since we have:
I. We have FullHD screen (without acceleration, but better then safe mode)
II. Sound works.
III. Internet works.
We need:
I. Natively boot from your HD and not using the USB.
II. 3D acceleration for my NVIDIA.
edited 21-aug-2012
I succeeded to solve my issues with the ML installation.
I have removed the next steps since I post my solution on the second post (see the top of this post.
To make it short:
After login to ML, execute Multi BEast 5.02, choose "EasyBeast". In most cases this should do.
If not all components run correctly, add all Bios custimizations + Chimera (if not installed yet) + imac 12,2
Good Luck.
Hope I helped someone.
Cheers
Snagar
Hi
This is a double post by mistake, it was not published when I send it so I created a new one.
You can find the latest in the following link:
http://www.tonymacx86.com/mountain-lion-desktop-support/61609-p8z68-v-pro-nvidia-670-works-but.html
SORRY !!!!
=================================================================
The following steps were my first impression and success with ML installation, but I did found some issues with the OS.
I reverted to booting from the USB so far, and wrote most of my issues and solution on the post stated above.
Navigate here: http://www.tonymacx86.com/mountain-lion-desktop-support/61609-p8z68-v-pro-nvidia-670-works-but.html
=================================================================
Here are the steps I did in order to install Mountain Lion (ML):
My Specs:
Motherboard: Asus P8Z68-V PRO
Bios Version: 1101
CPU: Intel i7 2600K
Memory: 4G
Graphic Card: NVIDIA 670 2G Gigabyte Windforce
Previous Version of OSX: Lion 10.7.4
Preparations:
1. Read the instruction on: tonymacx86.com - http://www.tonymacx86.com/downloads.php?do=file&id=119
2. Downloaded UniBeast 1.5 for ML + Latest Chimera (1.11.0) + Latest Multibeast.
3. Prepared 8G USB.
4. Bought ML from apple site (closed the installation window once it opened).
5. Execute the Unibeast 1.5, and pointed to the USB drive (went to sleep, it takes time )
Installation:
1. Boot into USB drive.
2. When the boot window displays, added the following options: "-v PCIRootUID=0 GraphicsEnabler=No"
This is due to me using Asus motherboard with NVIDIA 6xx graphic card that is not supported yet.
3. Once the installation screen appears follow the installation guide (I hope you prepared a partition for your installation). I installed on a clean partition and did not try to upgrade Lion 10.7.4, also it is always good to have an OSX backup system if something goes wrong.
4. Once installation finished, Boot again to your USB, but this time pick the "Partitioned" area you installed ML on it. I added the "-v" in order to see any Kernel Panic, but there were none.
5. After ML loaded with no issues, and with full HD resolution + Sound support (amazing isn't it) I tried to only install my DSDT.aml file for my motherboard without the other options from MultiBeast.
Now this is the tricky part since we have:
I. We have FullHD screen (without acceleration, but better then safe mode)
II. Sound works.
III. Internet works.
We need:
I. Natively boot from your HD and not using the USB.
II. 3D acceleration for my NVIDIA.
edited 21-aug-2012
I succeeded to solve my issues with the ML installation.
I have removed the next steps since I post my solution on the second post (see the top of this post.
To make it short:
After login to ML, execute Multi BEast 5.02, choose "EasyBeast". In most cases this should do.
If not all components run correctly, add all Bios custimizations + Chimera (if not installed yet) + imac 12,2
Good Luck.
Hope I helped someone.
Cheers
Snagar