[Success] - Asus ROG Strix Z490-E Gaming + i9 10900K + OpenCore

[Takagi]

To make the boot menu look pretty, I have "hide" aux entries enabled. Press the SPACEBAR on that screen and you'll see a bunch of extra stuff including reset NVRAM.

THANK YOU !! been wondering where those things went

 

[Takagi]

To make the boot menu look pretty, I have "hide" aux entries enabled. Press the SPACEBAR on that screen and you'll see a bunch of extra stuff including reset NVRAM.

So I reset NVRAM
I’m connected to Ethernet but it’s not loading anything in any program.
It last for a little bit but after like 5-10 mins I’ll get Kernel Panic type 13 protection registrar
I have -v on boot and I see all the words but it goes fast and I don’t know how to log it..

Any ideas on the internet?

 

[Takagi]

To make the boot menu look pretty, I have "hide" aux entries enabled. Press the SPACEBAR on that screen and you'll see a bunch of extra stuff including reset NVRAM.

I read somewhere that the kernel panic could be related to VirtualSMC ?

 

[Leesureone]

I read somewhere that the kernel panic could be related to VirtualSMC ?

If that was the reason then everyone who used @scope666 EFI would have kernel panic. The same version of VirtualSMC or similar versions are used by almost everyone who has a hack. I had the same board back when he started this thread and jump started my build using his uploads. I never had anything close to what you are experiencing, never had a crash. There's something very, very odd going on with your hardware IMHO.
Did you ever do the memory stress test?

I took out some of the device properties for the iGPU, doubt it will make much difference but you can try it.

 

[Takagi]

To make the boot menu look pretty, I have "hide" aux entries enabled. Press the SPACEBAR on that screen and you'll see a bunch of extra stuff including reset NVRAM.

Is it possible for you to send over a preset for the z490 BIOS settings

 

[scope666]

Is it possible for you to send over a preset for the z490 BIOS settings

Here you go. <attached>

 

[Takagi]

Here you go. <attached>

Thank you so much! See pictures of ALL the changes it made maybe there’s something in there that will help? After changing bios settings I lost my ssd. The one that has my max partition. I think it gone because of bios settings.. and maybe you’re familiar with the sata 5 & 6 issue with nvme. Anyway what sata plug are you using and I’m guessing I should use the same?? Because there was no mac partition I tried a fresh install just to see the code… but of course I have no ssd atm to install it to

 

[Takagi]

Here you go. <attached>

BRO thank you !!! I put my ssd from SATA 5/6 to 3/4 and everything is working )) I noticed to that I had fastboot on??? I swear I had that off… idk what the issue was or how many.. but using your bios preset fixed everything.. thank you so much

 

[Takagi]

If that was the reason then everyone who used @scope666 EFI would have kernel panic. The same version of VirtualSMC or similar versions are used by almost everyone who has a hack. I had the same board back when he started this thread and jump started my build using his uploads. I never had anything close to what you are experiencing, never had a crash. There's something very, very odd going on with your hardware IMHO.
Did you ever do the memory stress test?

I took out some of the device properties for the iGPU, doubt it will make much difference but you can try it.

I used their bios preset and changed my ssd from being in Sata 5/6 to sata 3/4
Everything is working now including internet.. no crash yet and I didn’t have to do a fresh install.

Thank you so much for your help
Cheers

 

[scope666]

BRO thank you !!! I put my ssd from SATA 5/6 to 3/4 and everything is working )) I noticed to that I had fastboot on??? I swear I had that off… idk what the issue was or how many.. but using your bios preset fixed everything.. thank you so much

Yeah, I'm a nerd who reads motherboard manuals ... I purposely avoided SATA ports 5/6.

PS: you can probably go back and set the Q-FAN stuff how you like. I was playing with settings because my fans tend to run slow after I wake from sleep.

PPS: Make sure my RAM timings / voltage match what you have in your system.