Contribute
Register

[Success] - Asus ROG Strix Z490-E Gaming + i9 10900K + OpenCore

Hi Scope66 I upgraded to Ventura using your latest EFI I am using a and RX 5700xt so I did have to change some grafiek settings and even got my network intel i225v working for that I needed to do this,

Disableiomapper set to False and no kexts or patch...set VT-D to enabled in bios...this is for intel i225v to work...

and its awesome

Interesting, the OC Guide still says to set Disableiomapper to true:


It might not be taking Ventura into account though.
 
Hi Scope66 I upgraded to Ventura using your latest EFI I am using a and RX 5700xt so I did have to change some grafiek settings and even got my network intel i225v working for that I needed to do this,

Disableiomapper set to False and no kexts or patch...set VT-D to enabled in bios...this is for intel i225v to work...

and its awesome
don't forget to update your hardware profile please:


thanks
 
Hi Scope66 I upgraded to Ventura using your latest EFI I am using a and RX 5700xt so I did have to change some grafiek settings and even got my network intel i225v working for that I needed to do this,

Disableiomapper set to False and no kexts or patch...set VT-D to enabled in bios...this is for intel i225v to work...

and its awesome

Did you modify your I225 firmware? Ethernet does NOT work for me with Disableiomapper = false and VT-D enabled.

I have to add the ACPI and KEXT files mentioned here, then it works:

Screenshot 2022-10-28 at 7.09.26 AM.png

Screenshot 2022-10-28 at 7.14.34 AM.png


Screenshot 2022-10-28 at 7.25.15 AM.png
 
Last edited:
Hi Scope I didn't modify my firmware and as I am using your latest EFI, I did remove from boot-args e1000=0

Hmmm, interesting... I might have to try that with the ACPI and KEXT disabled.

1667049656543.png
 
I have tried install the new S.O "Ace Ventura" and work fine and very well, i have copy all old settings Monterey of config.plist and only need change these things for to work fine Ethernet (in config.plist): Delete all patch for I225-V, must delete the boot args e1000=0, not need any kext for Ethernet. Done and Enjoy. (I have update the new OC with the version 0.8.6)
 
I have tried install the new S.O "Ace Ventura" and work fine and very well, i have copy all old settings Monterey of config.plist and only need change these things for to work fine Ethernet (in config.plist): Delete all patch for I225-V, must delete the boot args e1000=0, not need any kext for Ethernet. Done and Enjoy. (I have update the new OC with the version 0.8.6)

You're correct, Ethernet appears to be working without the KEXT and ACPI file and the e1000=0 line removed. I did have to reset networking to get Ethernet details to appear in System Settings. (it was blank before even though it was working)

I had to do:
  • sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
  • sudo rm /Library/Preferences/SystemConfiguration/preferences.plist

PS. I'm on 0.8.5 at the moment.
 
Last edited:
Back
Top