Contribute
Register

[Success] - Asus ROG Strix Z490-E Gaming + i9 10900K + OpenCore

Actually, I use these boot arguments: -v -wegnoegpu debug=0x100 keepsyms=1 e1000=0 igfxonln=1

Ah, so maybe a conflict with my AMD card or something...
 
OK, here's the latest 0.8.1 build. The big change this month is reset NVRAM and toggle SIP have been changed to drivers. Press the spacebar at the boot menu to expand and see those options. Also I incorporated MacDivanz's ethernet fix above.

View attachment 549514
View attachment 549515

Code:
craig@Craigs-iMac ocvalidate % pwd
/Users/craig/Downloads/OpenCore-0.8.1-RELEASE/Utilities/ocvalidate
craig@Craigs-iMac ocvalidate % ./ocvalidate /Volumes/EFI/EFI/OC/config.plist

NOTE: This version of ocvalidate is only compatible with OpenCore version 0.8.1!

Completed validating /Volumes/EFI/EFI/OC/config.plist in 6 ms. No issues found.

UPDATE: On my system still running Big Sur, I have to use the old bootarg (under NVRAM) dk.e1000=0 or I lock up. If you're running Monterey you should be good to go as-is.
Hi Scope666
I am using i7 10700k on Z490 E gaming and am planning to upgrade to i9 10900k. Do I need to change smbios from 20,1 to 20,2?
 
Thanks Scope666.
For me All things Work like a charm except rear USB C port which works on v0.8.0.
Onboard wifi now works too using itlwm or Airportitlwm kext.
Thanks again
Best Regards
 
Thanks Scope666.
For me All things Work like a charm except rear USB C port which works on v0.8.0.
Onboard wifi now works too using itlwm or Airportitlwm kext.
Thanks again
Best Regards

That is very strange as I didn't touch the USB map.
 
Back
Top