Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

Status
Not open for further replies.
appleiscool said:
Thanks. its all new again and looks very highly advance stuff -OpenCore- to learn vs rehabman's o.p guide.

I test installed mac os x 12.3.1 Monterey installed and worked with someone else pre made OpenCore EFI config for probook elitebook zbook g(x) series from other people with success.
but it looks like Monterey wont boot if smbios is macbookpro11,1, to 11,4, must be 11,5 or higher, 12,1

Homebrew killed support for 10.13.x ... looking at 10.14.6 for next solid stable production osx


I'm going through the main guides Dortania, including the link you gave.
www.tonymacx86.com

[Guide] Booting The USB Installer Using OpenCore

A guide in setting up your USB installer using OpenCore. You must have either a built-in ethernet or compatible Broadcom Wifi in your laptop for this guide to work. Built-in Intel Wifi can also work if set correctly...
www.tonymacx86.com www.tonymacx86.com

OpenCore Install Guide

Current supported version 0.9.1
dortania.github.io
I also found a similar guide for the visual learners:



I wonder if OpenCore Legacy Patcher is as close to the patches used rehabman guide can be used to patch Probook Elitebook Zbooks g(x) series x:1,2,3,..n
Click to expand...
your profile:

Screenshot 2022-05-14 223655.jpg


"hackintosh" not heard of that make and model laptop before

i3 / intel is too random

read the faq for proper hardware profile setup:
www.tonymacx86.com

[FAQ] READ FIRST! Laptop Frequent Questions

This is an updated FAQ from the Original Thread: https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/post-1045259 Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum...
www.tonymacx86.com www.tonymacx86.com
before your next post please, thanks :)
 
Feartech did you remove a coply of my posts?
 
digitaljames said:
On Elitebook 840 G4 wake from sleep is causing issues. Many apps freeze or crash. Google Chrome won't launch (but it will run if already running). Safari crashes on any page with a video. Preview will open some documents, but not others, especially pictures. The only solution is rebooting. Everything else is working good. Same occurs in High Sierra (i'm on high sierra) and Mojave. Is there any solution for this?
Click to expand...
Hi! Did you solve this wake issue?
Have same problems on Zbook G3 and G4
 
So my findings at the end of this for anyone with problems, for mojave and catalina, if you use macos mojave patcher.dmg or catalina patcher and install the fixes in the post install included and then use all the latest versions of the kexts used in this original guide.
And of course an appropriate version of clover "thanks Feartech" the install is pretty straight forward.
 

Attachments

  • Screenshot 2022-05-16 at 09.02.29.png
    Screenshot 2022-05-16 at 09.02.29.png
    777.4 KB · Views: 30
ian6267 said:
So my findings at the end of this for anyone with problems, for mojave and catalina, if you use macos mojave patcher.dmg or catalina patcher and install the fixes in the post install included and then use all the latest versions of the kexts used in this original guide.
And of course an appropriate version of clover "thanks Feartech" the install is pretty straight forward.
Click to expand...
Glad you got it sorted! :)
 
Hi! Need help to solve WAKE Issue

Zbook G3 wake from sleep is causing the apps to freeze or hang. QuickTime and other players doesn't work. Safari will freeze too. Tried VoodooTSCSync.kext, but nothing happens. The only way is to solve glitchy apps performance is rebooting.

Problem is on any OS i have (Catalina, High Sierra)


ACPI LOG BEFORE SLEEP (PTS) AND WAKE EVENT:
ACPI SLEEP
Facs->FirmwareWakingVector: 0x2000
Facs->Length: 0x40
Facs->Version: 0x2
Facs->XFirmwareWakingVector: 0x0
Facs->OspmFlags: 0x0
ACPI Exception: AE_AML_PACKAGE_LIMIT,
ACPI Exception: AE_AML_PACKAGE_LIMIT,
Index (0x0000000E3) is beyond end of object (length 0xA)
Index (0x0000000E3) is beyond end of object (length 0xA)
(20160930/exoparg2-531)
(20160930/exoparg2-531)
[GADR] @00014 #0088:
[GADR] @00014 #0088:
-Return Value-
-Return Value-
(
(
)
)
[
[
Arg0
Arg0
]
]




Local0:
Local0:
ffffff8040c9c0a0
ffffff8040c9c0a0
<Obj>
<Obj>
Integer
Integer
1
1




Initialized Arguments for Method [GADR]: (0 arguments defined for method invocation)
Initialized Arguments for Method [GADR]: (0 arguments defined for method invocation)
Arg0:
Arg0:
ffffff803dd09c30
ffffff803dd09c30
<Obj>
<Obj>
Integer
Integer
0.00E+00
0.00E+00


Arg1:
Arg1:
ffffff803df04230
ffffff803df04230
<Obj>
<Obj>
Package
Package
ffffff803df04230
ffffff803df04230




ACPI Error:
ACPI Error:
Method parse/execution failed
Method parse/execution failed
[\_SB.GADR] (Node ffffff803e334d80)
[\_SB.GADR] (Node ffffff803e334d80)
, AE_AML_PACKAGE_LIMIT
, AE_AML_PACKAGE_LIMIT
(20160930/psparse-632)
(20160930/psparse-632)




ACPI Error:
ACPI Error:
Method parse/execution failed
Method parse/execution failed
[\_SB.GGOV] (Node ffffff803e334e10)
[\_SB.GGOV] (Node ffffff803e334e10)
, AE_AML_PACKAGE_LIMIT
, AE_AML_PACKAGE_LIMIT
(20160930/psparse-632)
(20160930/psparse-632)



ACPI Error:
ACPI Error:
Method parse/execution failed
Method parse/execution failed
[\ZPTS] (Node ffffff803e3456f0)
[\ZPTS] (Node ffffff803e3456f0)
, AE_AML_PACKAGE_LIMIT
, AE_AML_PACKAGE_LIMIT
(20160930/psparse-632)
(20160930/psparse-632)



ACPI Error:
ACPI Error:
Method parse/execution failed
Method parse/execution failed
[\_PTS] (Node ffffff803e358d50)
[\_PTS] (Node ffffff803e358d50)
, AE_AML_PACKAGE_LIMIT
, AE_AML_PACKAGE_LIMIT
(20160930/psparse-632)
(20160930/psparse-632)


ACPI S3 WAKE
ACPI Exception: AE_AML_PACKAGE_LIMIT,
ACPI Exception: AE_AML_PACKAGE_LIMIT,
Index (0x0000000E3) is beyond end of object (length 0xA)
Index (0x0000000E3) is beyond end of object (length 0xA)
(20160930/exoparg2-531)
(20160930/exoparg2-531)



[GADR] @00014 #0088:
[GADR] @00014 #0088:
-Return Value-
-Return Value-
(
(
)
)
[
[
Arg0
Arg0
]
]




Local0:
Local0:
ffffff803debd3c0
ffffff803debd3c0
<Obj>
<Obj>
Integer
Integer
1
1




Initialized Arguments for Method [GADR]: (0 arguments defined for method invocation)
Initialized Arguments for Method [GADR]: (0 arguments defined for method invocation)
Arg0:
Arg0:
ffffff8040c1dc80
ffffff8040c1dc80
<Obj>
<Obj>
Integer
Integer
0.00E+00
0.00E+00


Arg1:
Arg1:
ffffff803df04230
ffffff803df04230
<Obj>
<Obj>
Package
Package
ffffff803df04230
ffffff803df04230




ACPI Error:
ACPI Error:
Method parse/execution failed
Method parse/execution failed
[\_SB.GADR] (Node ffffff803e334d80)
[\_SB.GADR] (Node ffffff803e334d80)
, AE_AML_PACKAGE_LIMIT
, AE_AML_PACKAGE_LIMIT
(20160930/psparse-632)
(20160930/psparse-632)



ACPI Error:
ACPI Error:
Method parse/execution failed
Method parse/execution failed
[\_SB.SGOV] (Node ffffff803e3340c0)
[\_SB.SGOV] (Node ffffff803e3340c0)
, AE_AML_PACKAGE_LIMIT
, AE_AML_PACKAGE_LIMIT
(20160930/psparse-632)
(20160930/psparse-632)



ACPI Error:
ACPI Error:
Method parse/execution failed
Method parse/execution failed
[\ZWAK] (Node ffffff803e345c90)
[\ZWAK] (Node ffffff803e345c90)
, AE_AML_PACKAGE_LIMIT
, AE_AML_PACKAGE_LIMIT
(20160930/psparse-632)
(20160930/psparse-632)



ACPI Error:
ACPI Error:
Method parse/execution failed
Method parse/execution failed
[\_WAK] (Node ffffff803e358450)
[\_WAK] (Node ffffff803e358450)
, AE_AML_PACKAGE_LIMIT
, AE_AML_PACKAGE_LIMIT
(20160930/psparse-632)
(20160930/psparse-632)
ACPI Exception: AE_AML_PACKAGE_LIMIT,
ACPI Exception: AE_AML_PACKAGE_LIMIT,
While executing method \_WAK
While executing method \_WAK
(20160930/hwesleep-161)
(20160930/hwesleep-161)




Facs->FirmwareWakingVector: 0x0
Facs->Length: 0x40
Facs->Version: 0x2
Facs->XFirmwareWakingVector: 0x0
Facs->OspmFlags: 0x0





====== WAKE




AppleACPIPlatformPower Wake reason: power-button XHC (User)
AppleACPIPlatformPower Wake reason: power-button XHC (User)
Click to expand...
 

Attachments

  • _SLEEP_WAKE_PROBLEM.zip
    5.8 MB · Views: 40
Last edited:
it seems to be disabled in Rehabmans config.plist I haven't un-disabled it as I'm thinking there's probably a reason for this?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top