Mac Monterey suddenly stopped booting (USB issue?)

[NorthAmTransAm]

The above has been the case since Monterey, a bit annoying but I use mostly bluetooth so it's not too bad. I could use all ports in the previous version. But USB was never stable as I mentioned.

Lets try something. Remove USBInjectall and add this USBMap.

 

[Middleman]

The above has been the case since Monterey, a bit annoying but I use mostly bluetooth so it's not too bad. I could use all ports in the previous version. But USB was never stable as I mentioned.

Have you also tried to add SSDT-UIAC.aml to the setup? I find that usually helps.

 

[NorthAmTransAm]

Have you also tried to add SSDT-UIAC.aml to the setup? I find that usually helps.

He had trouble with his mapping the first round. Trying a USBMap right now.

 

[hackeron]

Have you also tried to add SSDT-UIAC.aml to the setup? I find that usually helps.

Trying the USBMap kext, where do I find the SSDT-UIAC.aml file?

 

[NorthAmTransAm]

Trying the USBMap kext, where do I find the SSDT-UIAC.aml file?

That is a custom map for USBInjectall. We're accomplishing that right now with the USBMap.kext instead.

Make sure you remove USBInjectAll.

 

[hackeron]

The USB ports appear to work, but now my Bluetooth and Wifi stopped working! - wonder why...

Sorry, Wifi works, just Bluetooth broke!

 

[NorthAmTransAm]

The USB ports appear to work, but now my Bluetooth and Wifi stopped working! - wonder why...

Sorry, Wifi works, just Bluetooth broke!

Stand by! Time for an education. Might be a little while though as I've gotta finish up some work.

 

[hackeron]

No worries, I will revert for now as I need bluetooth more than USB, but would be amazing to have both if possible

 

[NorthAmTransAm]

Alright! What you need to do is check out the USB section my guide linked below. Find out where your bluetooth header is connected on you mobo and edit the info.plist inside of USBMap.kext.

Hint: you'll need to change the connector type to 255

[Success] ASUS Prime Z370-A+i9-9900k Pro Audio Build

NorthAmTransAm’s Pro Tools Machine: ASUS Prime Z370-A | i9-9900K | RX 580 Note 1: Please do not simply grab the EFI and carry on. You need to read through all of this first. Get an understanding and set yourself up for success. Note 2: I've saved us from repetition here. Please visit Dortania...

www.tonymacx86.com

For further education, as an example check out this.

MSI PRO Z690 A DDR4 + i7-12700K + AMD RX 580

Congratulations! A good Golden Build!

www.tonymacx86.com

@Middleman I didn't mean to shoot ya down, just wanted to confirm the issue!

 

[hackeron]

Alright! What you need to do is check out the USB section my guide linked below. Find out where your bluetooth header is connected on you mobo and edit the info.plist inside of USBMap.kext.

Hint: you'll need to change the connector type to 255

[Success] ASUS Prime Z370-A+i9-9900k Pro Audio Build

NorthAmTransAm’s Pro Tools Machine: ASUS Prime Z370-A | i9-9900K | RX 580 Note 1: Please do not simply grab the EFI and carry on. You need to read through all of this first. Get an understanding and set yourself up for success. Note 2: I've saved us from repetition here. Please visit Dortania...

www.tonymacx86.com

For further education, as an example check out this.

MSI PRO Z690 A DDR4 + i7-12700K + AMD RX 580

Congratulations! A good Golden Build!

www.tonymacx86.com

@Middleman I didn't mean to shoot ya down, just wanted to confirm the issue!

Thank you for your help - It is almost 3am here, I am going to dedicate some time tomorrow to go through both in detail, had a quick glance and these look like fantastic resources, I really appreciate your hard work putting these together!