MSI PRO Z690 A DDR4 + i7-12700K + AMD RX 580

[NorthAmTransAm]

i try iltwm and Airportitlwm-monterey, both of them dont work for me

Do you have AppleVTD in your IOReg?

 

[NorthAmTransAm]

Hi @NorthAmTransAm, you are music creator?

Yes. Full time. This build has been great for it.

 

[danny2305]

hello, is there a recent update for the ssdt-plug and kext cpu friend and cpu friend data for the 12900k cu because with those you provided me it works very well but the cpu overheats during cinebench test... is it normal to reach 100 degrees during bench? I have exactly the same config for windows and I don't climb more than 88 degrees with cinebench? Why? I have watercooling 480...

 

[NorthAmTransAm]

hello, is there a recent update for the ssdt-plug and kext cpu friend and cpu friend data for the 12900k cu because with those you provided me it works very well but the cpu overheats during cinebench test... is it normal to reach 100 degrees during bench? I have exactly the same config for windows and I don't climb more than 88 degrees with cinebench? Why? I have watercooling 480...

Attached is the most recent SSDT-PLUG-ALT from Dortania and the CPUFRIEND+DATAPROVIDER that I use.

In BIOS there’s an option to change cooler type. I believe it gives you three options: Box, Tower, Water. Make sure you've chosen water.

Something to note, this is a hot CPU. Especially the 12900K. You can try under-volting it little by little.

 

[danny2305]

Thank you! Regarding the flash of the Titan v2, which one exactly should I use? I want to be sure I am not mistaken. You said NV33, but there are several.For the Titan v2. Which one is the best?
Thanks in advance and sorry for the many questions, I'm a beginner...

 

[NorthAmTransAm]

Thank you! Regarding the flash of the Titan v2, which one exactly should I use? I want to be sure I am not mistaken. You said NV33, but there are several.For the Titan v2. Which one is the best?
Thanks in advance and sorry for the many questions, I'm a beginner...

Translated Per forum rules, don't forget to translate to English.

I know it's a little confusing as the the GC-Titan NVM33 is for the on board version. However, it is what was advised to me to use for the GC-Titan 2.0 Card by @CaseySJ and it's been great. I've attached it here.

 

[danny2305]

OK, thanks. I flashed and connected pin 1 and 3.
I have been on hackingdrom and downloaded the SSDT which I will add in my file.
I still have a question about the wires connected to the Titan.
Am I plugging in the 2 PCI-e power supplies?
Am I plugging in USB 9 pin?
There is a 3 pin plug left. Should I plug it in somewhere? I have the same motherboard as you...
Then do I need to make any other changes?
Thank you!

 

[NorthAmTransAm]

OK, thanks. I flashed and connected pin 1 and 3.
I have been on hackingdrom and downloaded the SSDT which I will add in my file.
I still have a question about the wires connected to the Titan.
Am I plugging in the 2 PCI-e power supplies?
Am I plugging in USB 9 pin?
There is a 3 pin plug left. Should I plug it in somewhere? I have the same motherboard as you...
Then do I need to make any other changes?
Thank you!

Congrats on the flashing! Not so bad, right?

As for the two power connectors, they are not necessary unless you plan on charging something with the Thunderbolt connectors.

I unplugged the USB 2.0 Header as well.

Everything working?

 

[danny2305]

Congrats on the flashing! Not so bad, right?

As for the two power connectors, they are not necessary unless you plan on charging something with the thunderbolt connectors.

I unplugged the USB 2.0 Header as well.

Everything working?

I've not try yet. I just put back the 4 screws, and I install it. I will come back to you shortly for the conclusion. So far everything has gone well. and the flash has been soft.

 

[danny2305]

OK! Everything works. My Apollo Twin is connected. However, it must be on when starting or otherwise it is not recognized...
Is there a solution?