- Joined
- Mar 14, 2018
- Messages
- 10
- Motherboard
- Asus Ro Strix Z490 Gaming E
- CPU
- I9-10850k
- Graphics
- rx6600
- Mac
Not wanting to bother you guys with covered issues but I couldn't yet find a solution with my setup (almost the same as scope's) to get 15 ubs ports running.
Does anyone have a successful config with front USB-C port and 3 reds, 2 blues and the 4xUSB 2.0s + internal USB 2.0 all working?
Not working but needed: the front / (also rear) USB-C and the single rear red port. I have a Kraken x63 on the internal USB so will keep that. BT has recognised but not connected, using the various kexts mentioned. Would be good to get that running but will try an Archer card tomorrow.
I tried Scope's EFI with only following changes with no success in this respect (nothing shows on said ports). Many thanks for making the mysterious torturous onboard audio problem disappear though!
Changes:
removed disable dGPU in device properties
boot args now: dk.e1000=0 igfxonln=1 agdpmod=pikera
removed debugging
UUID etc
I removed the inject all kext and injected everything as otherwise was originally, with propertree.
If I need to start from scratch, if anyone could point me to the easiest current method for Monterey I would be grateful. Not sure whether to change config line XCHI port limit in the process or not for example. The SSDT.rehub edit is getting way over my head - too many uncertains - prefer to get a working EFI
asus rog strix z490 gaming e
AMD radeon rx6600 8GB
i9 10850k
Kraken x63
Monterey 12.2.1
OC 7.8
Does anyone have a successful config with front USB-C port and 3 reds, 2 blues and the 4xUSB 2.0s + internal USB 2.0 all working?
Not working but needed: the front / (also rear) USB-C and the single rear red port. I have a Kraken x63 on the internal USB so will keep that. BT has recognised but not connected, using the various kexts mentioned. Would be good to get that running but will try an Archer card tomorrow.
I tried Scope's EFI with only following changes with no success in this respect (nothing shows on said ports). Many thanks for making the mysterious torturous onboard audio problem disappear though!
Changes:
removed disable dGPU in device properties
boot args now: dk.e1000=0 igfxonln=1 agdpmod=pikera
removed debugging
UUID etc
I removed the inject all kext and injected everything as otherwise was originally, with propertree.
If I need to start from scratch, if anyone could point me to the easiest current method for Monterey I would be grateful. Not sure whether to change config line XCHI port limit in the process or not for example. The SSDT.rehub edit is getting way over my head - too many uncertains - prefer to get a working EFI
asus rog strix z490 gaming e
AMD radeon rx6600 8GB
i9 10850k
Kraken x63
Monterey 12.2.1
OC 7.8