- Joined
- Jul 17, 2019
- Messages
- 123
- Motherboard
- Asus TUF Gaming Z590-PLUS WIFI
- CPU
- i9-10900K
- Graphics
- RX 6800 XT
- Mac
- Mobile Phone
Hmm okay ... I'm wondering if there's something going on with my board in general.This has never happened to me.
Hmm okay ... I'm wondering if there's something going on with my board in general.This has never happened to me.
Hmm okay ... I'm wondering if there's something going on with my board in general.
I backed up and updated my OpenCore to 0.7.7 to get ready but I'm not seeing the update in Software Update. Not sure why. I guess I'll check again tomorrow.Anyone installed 12.2 yet?
I didn't have this exact behaviour, but I started having issues with USB ports dropping out after updating to Monterey. I upgraded my BIOS to f9 (2021/11/29) this weekend and my USB is backing to normal function.First, I just want to say that this thread has been extremely helpful for my build using this board. I'm having a really severe issue with USB though. I have everything mapped correctly; however, all of my ports will randomly shut off on me, and the only way to get them back, is to reboot, or to hit the power button to set the hack to sleep, and upon waking, USB will work again. Idk why this happens, but it keeps me from using this build as a daily driver, as this issue has caused data corruption before (yeah I had an external HDD connected). Has anyone had this issue with this board? I'm about to go out, and buy a separate XHCI card with dedicated controllers at this point.
I backed up and updated my OpenCore to 0.7.7 to get ready but I'm not seeing the update in Software Update. Not sure why. I guess I'll check again tomorrow.
click on advanced, make sure a tick is on check for updates and click okWhat I can try else? I'm not getting any updates in "Software Update"
reset nvram helped, thanks a lot!click on advanced, make sure a tick is on check for updates and click ok
reset nvram at the boot picker may help