Hello,
Here is the final round trip of USB Mapping of my
Gigabyte B550 Vision D-P. Please note the following details:
- Nvidia GTX680 video card;
- Intel AX200 installed, but not used;
- BIOS version is F12 (it is the same of F13 on Vision D model);
- EFI Folder used is the one supplied by @CaseSJ
in this post;
- The rear I/O layout reference convention for the mapping sheet below is the following (black=USB2, blue=USB3-A, yellow=USB3-C):
View attachment 540070
- My case (HAF932 Advanced) has the following layout in front: 4 USB2.0 ports (only 2 ports are connected to the motherboard, to the
F_USB1 header). Then 2 USB3.0 type A ports, connected to the motherboard (
F_U32 header).
OK, let's jump to the USB Mapping. This is a spreadsheet I have just prepared (for your reference, SX=left, DX=right):
View attachment 540071
It should be self-explaining, I guess.
Well, these are major considerations about:
a) Front USB2.0 ports, which are connected to the F_USB1 header, don't work. Any device was not recognized by Hackintool nor mounted. Dead at all. As already said, this is fairly weird, because those ports were running before upgrading the BIOS version from F11. For two weeks prior upgrade, I have had there my Logitech USB receiver connected for keyboard and mouse operation.
Now they are not usable.
b) In general,
PO10, which is also a USB2.0 port (rear), is a little bit mad, because:
b1) USB2 and USB3 sticks are correctly mounted => GOOD, it looks like working well, but;
b2) A USB2 stick in Hackintool is not correctly recognized: seen as USB2.0 HUB; and
b3) A USB3 stick in Hackintool is not recognized at all.
Other ports look like running well, so far: device is mounted, device is shown in Hackintool with correct properties (device name, speed...).
At the moment, the most annoying situation is losing the front USB2 ports. I don't know how to fix them.
Please note they are working on W10.
If someone is running my motherboard, feel free to share experience or help in finding a solution about front USB2 ports.
WAKE/SLEEP
not tested so far, do not know if it is working on not.
Thank you. Bye.