Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

[CaseySJ]

Still investigating or again overloaded?
No worries though

The screenshot looks correct.

• Do you have a screenshot of the error?
• Does it occur every time the system boots, or only occasionally?
• Despite the message, audio works normally?

 

[MacArthur]

Here we go !
- It always happens
- Audio is working fine but sometimes I have some lag using Spotify. No idea if this can be linked to the EFI OR to the Sound Control apps used to monitor my DAC which would need to be updated by the developper (running currently Monterey 12.2 ß2 (21D5039d). This apps seems to be very sensitive to macOS upgrade.
- The EFI is stricly YOUR EFI updated through hackinDROM. No change.

 

[suren6791]

Please post a screenshot of OpenCore Configurator --> Kernel section. Widen the window so we can see which kexts are enabled or disabled.

Please find attached

 

[suren6791]

Please post a screenshot of OpenCore Configurator --> Kernel section. Widen the window so we can see which kexts are enabled or disabled.

I was on F20 BIOS before the update to OC 0.7.7, and it used to work. Now I am on F21. Could this be the problem?

 

[CaseySJ]

I was on F20 BIOS before the update to OC 0.7.7, and it used to work. Now I am on F21. Could this be the problem?

Couple of suggestions:

• Check “SecureBootModel”. Is it set to Default or Disabled? Try one or the other.
• If WiFi worked in OC 0.7.6, you can always try that version again by unzipping the backup that was made by HackinDROM. Backup should be in EFI partition.
• Try downloading the Monterey version of AirportItlwm from OpenIntelWireless website on GitHub and renaming it to AirportItlwm-Monterey.kext, then replacing the file in OC/Kexts folder.
• If all else fails, try BIOS F20 again. However, if Intel WiFi is working in Big Sur, then BIOS may not be the issue.

 

[CaseySJ]

Here we go !
- It always happens
- Audio is working fine but sometimes I have some lag using Spotify. No idea if this can be linked to the EFI OR to the Sound Control apps used to monitor my DAC which would need to be updated by the developper (running currently Monterey 12.2 ß2 (21D5039d). This apps seems to be very sensitive to macOS upgrade.
- The EFI is stricly YOUR EFI updated through hackinDROM. No change.

I wonder if this is due to a bug in AudioDxe.efi that will be fixed in OC 0.7.8:

AudioDxe: Fixed bug in disabling unused outputs introduced in 0.7.7 u… · acidanthera/OpenCorePkg@2c66392

…pdates Fixes: https://github.com/acidanthera/bugtracker/issues/1920

github.com

 

[sam.brett]

Hi all, I've been away for a while and just come back to update my Hackintosh. I've been on OpenCore 6.4 for ages and I've just been stepping up a version or two at a time and updating the relevant fields. I'm not really sure what I should be looking for as far as stability goes. I'm currently booted from the USB drive with 7.6 and I've not noticed anything not working. I'm a little behind on macOS versions, too, (11.2.3). I'm wondering if I should commit to 7.6 before updating. I've got backups, and this machine is non-critical.

Any advice would be welcome. Thanks.

 

[CaseySJ]

Hi all, I've been away for a while and just come back to update my Hackintosh. I've been on OpenCore 6.4 for ages and I've just been stepping up a version or two at a time and updating the relevant fields. I'm not really sure what I should be looking for as far as stability goes. I'm currently booted from the USB drive with 7.6 and I've not noticed anything not working. I'm a little behind on macOS versions, too, (11.2.3). I'm wondering if I should commit to 7.6 before updating. I've got backups, and this machine is non-critical.

Any advice would be welcome. Thanks.

If you refer to the OpenCore 0.7.6 mini-guide (click here) you'll find a section called Things to Test or Check.

 

[sam.brett]

Thanks @CaseySJ, and for all the other stuff on here, too. Sorry I missed the specifics in that mini guide as I'd used about 8 of them. All the Bluetooth stuff seems fine; not that I use much of it. The update to the latest non-monterey MacOS was fine too.

I don't see any specific mini-guide for Monterey on the top post, does that mean its a straightforward update? I'm not going to be updating imminently as some of the SW I use isn't supported yet.

 

[CaseySJ]

Thanks @CaseySJ, and for all the other stuff on here, too. Sorry I missed the specifics in that mini guide as I'd used about 8 of them. All the Bluetooth stuff seems fine; not that I use much of it. The update to the latest non-monterey MacOS was fine too.

No worries.

I don't see any specific mini-guide for Monterey on the top post, does that mean its a straightforward update? I'm not going to be updating imminently as some of the SW I use isn't supported yet.

To install Monterey, we need a minimum of OpenCore 0.7.6 because it contains specific fixes for the Monterey install image. We should also set SecureBootModel to Disabled. This can be enabled after Monterey is up and running.