Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

[suren6791]

The culprit is Crucial 2TB P2.

NVME M.2 PCIE SSDs | Solid State Drives

Crucial NVME M.2 PCIE SSDs unlock the performance of your computer and deliver shorter load times and faster data transfers.

www.crucial.com

Is there a way to fix or should I just use another M.2?

 

[CaseySJ]

Is there a way to fix or should I just use another M.2?

I did not expect Crucial NVMe SSDs to experience this problem. Keep using it for now while we see if anyone else is having the same problem with this drive.

 

[trs96]

I did not expect Crucial NVMe SSDs to experience this problem.

That P2 NVMe uses the Phison E13T controller which some believe to have the same TRIM issues that the Samsung NVMe drives have when formatted APFS. The Sabrent Rocket Q4 uses a similar Phison E controller.

The Crucial P1 and P5 drives use completely different controllers. Silicon Motion and Micron.

The Crucial drives with a Micron controller will be your best bet for a macOS boot drive. I've used Micron/Crucial SSDs (MLC NAND) for nearly 10 years now with zero problems.

https://www.amazon.com/dp/B098W1NDV2/?tag=tonymacx86com-20

 

[CaseySJ]

That P2 NVMe uses the Phison E13T controller which some believe to have the same TRIM issues that the Samsung NVMe drives have when formatted APFS. The Sabrent Rocket Q4 uses a similar Phison E controller.

The Crucial P1 and P5 drives use completely different controllers. Silicon Motion and Micron.

View attachment 537010

The Crucial drives with a Micron controller will be your best bet for a macOS boot drive. I've used Micron/Crucial SSDs (MLC NAND) for nearly 10 years now with zero problems.

https://www.amazon.com/dp/B098W1NDV2/?tag=tonymacx86com-20

Will add Crucial P2 NVMe SSD to the avoidance list for Monterey.

 

[epalzeo]

Hi a question i've not found

i have a working RX580 GPU

i'm using the igpu plist file, and enable igpu in bios

My display is not working/Detected. (its working in windows)

What could be wrong ?

Thanks

 

[CaseySJ]

Hi a question i've not found

i have a working RX580 GPU

i'm using the igpu plist file, and enable igpu in bios

My display is not working/Detected. (its working in windows)

What could be wrong ?

Thanks

Some questions and suggestions:

• Are you using HDMI-to-HDMI cable or USB-C to DisplayPort cable?
• What is the make/model of your monitor?
• Please post screenshot of OpenCore Configurator --> DeviceProperties as shown (click on PciRoot(0x0)/Pci(0x2,0x0)):

 

[epalzeo]

My 4k (samsung) screen are working on RX580, and I've got a full HD wimaxit screen plugged on onboard HDMI.

This the onboard HMDI I want to make it run.

 

[epalzeo]

My 4k (samsung) screen are working on RX580, and I've got a full HD wimaxit screen plugged on onboard HDMI.

This the onboard HMDI I want to make it run.

And here is the PCI root 0 / pci 0x2,0, so no model detected ??

 

[CaseySJ]

And here is the PCI root 0 / pci 0x2,0, so no model detected ??

You said you are using config-Intel-iGPU.plist, but that screenshot shows a different file. Device Properties should look like the screenshot in my previous post.

 

[epalzeo]

Sorry her's the good one