Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

[CaseySJ]

No good. The Intel I-225V Ethernet port fails to connect in Monterey regardless of whether Monterey is installed as an upgrade or from scratch.

Revision 0x0002 and NVM firmware 1.45 don’t appear to help either.

The plot gets thicker than gravy on Thanksgiving day.

The plot has gotten even thicccc’er than the new 16” MacBook Pro.

 

[jonpm]

After couple hours read all those bugs at update Montentry, at least know how deep of the water....
remove all fakeID kext for Intel 225v ports, seems Montentry native support.
Check all devices, only bluetooth not working, try many ways fix it, but no luck at all. 2.6.1 bluetoolfixup also not working. Remember I chose BCM9460CDP wifi card, sure Apple native support. Off power pull it out and replug.
All working so smooth right now. Stupid me spend couple hours debug....
Next is try to fix the display card temperature info, @CaseySJ any easy way to fix that?

View attachment 532629

What tool are you using for this dashboard please?

 

[lewys]

Revision 0x0002 and NVM firmware 1.45 don’t appear to help either.

I forgot to mention that I’m on F20 BIOS (never had any issues with it)

also I upgraded from Big Sur, not a fresh install

 

[yurid]

Hmm, the plot thickens. You are using iMac20,1 and @lewys has iMac20,2. @MacArthur tried iMac20,2 without success.

• Which version of BIOS are you running?
• Are your BIOS parameters configured the same as in Post 1?

I have F20 BIOS. F21 is available, but I am waiting for a brave soul to try it first.
BIOS setting is the same with exception of Vt-d. It is Enabled (I am running VMware Fusion 12-Pro) and I couldn't find the Initial Display Output setting in the IOPorts tab, though my GPU is in slot 1.

 

[CaseySJ]

I forgot to mention that I’m on F20 BIOS (never had any issues with it)

also I upgraded from Big Sur, not a fresh install

I have F20 BIOS. F21 is available, but I am waiting for a brave soul to try it first.
BIOS setting is the same with exception of Vt-d. It is Enabled (I am running VMware Fusion 12-Pro) and I couldn't find the Initial Display Output setting in the IOPorts tab, though my GPU is in slot 1.

Interesting...both of you have BIOS F20 and your Intel I-225V Ethernet port is working. I'll try this shortly. Fortunately, OpenCore 0.7.5 due as early as tomorrow allows "Resizable BAR Support" to be enabled in BIOS without affecting macOS.

cc: @MacArthur

 

[yurid]

Interesting...both of you have BIOS F20 and your Intel I-225V Ethernet port is working. I'll try this shortly. Fortunately, OpenCore 0.7.5 due as early as tomorrow allows "Resizable BAR Support" to be enabled in BIOS without affecting macOS.

cc: @MacArthur

I do not use Ethernet ports. Thanks to your guide, I have WiFi in my Hackintosh for the first time. I am using YOUBO Dual Band WiFi BCM94360C and have very good BT and WiFi.

 

[canyondust]

I’m also on F20 (vision G) and currently updating from Big Sur to Monterrey. Will have results in about 40mins

 

[joe6187]

What tool are you using for this dashboard please?

sensei

 

[CaseySJ]

What tool are you using for this dashboard please?

sensei

It's located here:

Sensei: The Ultimate Mac Cleaner for macOS. Speed up your Mac Performance.

Sensei is a Mac cleaner, monitoring and optimizer app. Learn how to clean Mac, optimize performance, check battery health and clean up hard drive to get more free space on your Macbook or iMac. Download the best Mac cleanup app now!

sensei.app

(Partial) List of Mac Hardware/Sensor Monitoring Tools:

• HWMonitorSMC2 -- free from GitHub
• iStat Menus
• iStatistica & iStatistica Pro -- from Mac App Store
• Sensei

 

[MacArthur]

Hmmm tempting again. New Halloween party.
Can give a try. Will be faster than Big Sur clean install, upgrade to Monterey and then migration assist.
All in all, it was a 4h session