Contribute
Register

Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

lewys said:
Monterey. I can attach my config if you want
Click to expand...
Just to confirm: If you connect an Ethernet cable to the red Ethernet port, disconnect the other Ethernet port, and turn off WiFi, can you still browse the web?
 
Build 1
Z490 Vision D |  i7 10700K |  Radeon RX 5700 XT OC 8GB
Build 2
Z370 AORUS Gaming WIFI |  i7 3770K |  AORUS Radeon RX 580
mntbighker said:
I got a Blackmagic UltraStudio Recorder 3G. The first time I connected it I was able to capture a video recording. The companion software recognizes the device, and I can switch between SDI and HDMI. Every subsequent attempt at using it since then fails. The Blackmagic software continues to detect the device, and I can switch between SDI and HDMI. But no video stream appears in anything I try. It worked once and only once. I have tried booting with it connected and not connected. I have yet to revert to the F5 BIOS, and I have made no attempt to flash the TB chip. The Blackmagic app says it's capturing at 1080p 29.97. I was able to capture on the same box on Windows 10 using the same software, but Windows is having very annoying audio issues. And I hate to have to boot Windows every time I need a video capture. I'm on 10.15.7.
Click to expand...
Check your Black Magic Video Desktop Version. It cannot be greater than 11.7 to work on a Mac. Any Mac.

I use mine with OBS and had to uninstall the latest 12.1 version and revert back to 11.7.

Still work fine at 11.7.
 
CaseySJ said:
Just to confirm: If you connect an Ethernet cable to the red Ethernet port, disconnect the other Ethernet port, and turn off WiFi, can you still browse the web?
Click to expand...
Yes, I’m attaching my config.plist
 

Attachments

  • config.plist
    22.1 KB · Views: 73
iMacPro20,2
Z490 Vision D |  i9 10900 |  Radeon Nitro+ RX 5700 XT 8GB
asharkey said:
Check your Black Magic Video Desktop Version. It cannot be greater than 11.7 to work on a Mac. Any Mac.

I use mine with OBS and had to uninstall the latest 12.1 version and revert back to 11.7.

Still work fine at 11.7.
Click to expand...
I'm on 12.1 on Monterey, and at the moment it seems to be working. But thanks for the advise. If I have issues I will try reverting.
 
Blackintosh
Z490 Vision D |  i7 10700 |  RX 570 8GB
I just upgraded to 12.1 Monterey and I can't connect my Slave PC (Big Sur) with Syba 1 Gigabit Ethernet Network Card on board. I see that the network is working on both machines, but no connections, what could it be?

I connected as usual via Ethernet cable (red Ethernet port) to Slave PC
Other port with Ethernet work just fine on Z490 Vision-D

I also tried disabled FakePCII_Intel_I225-V and other FakePCII kext, but its does not help:(

Pic_01.png
pic_2.png

Pic_3.png
 
Last edited:
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top