Ohchang's build: Gigabyte Z590 Vision G + i7-10700K + AMD RX580

[edoardoww]

Thanks for your help
I fixed it using SMBIOS ImacPro1.1
I have another problem, after sleep the audio of the Dislpayport does not work, only Realtek USB 2.0 Audio works.

 

[root2]

Thanks for your help
I fixed it using SMBIOS ImacPro1.1
I have another problem, after sleep the audio of the Dislpayport does not work, only Realtek USB 2.0 Audio works.

IMHO Displayport does not support audio at all. Only HDMI can transport audio.
Edit: Nevermind, Displayport can transport audio.
The audio is "generated" by your GPU, thus, I suggest you investigate further towards WhateverGreen

Have you added agdpmod=pikera already?

You can also post here, because CaseySJ uses the same GPU.

 

[root2]

There is a new BIOS F5, but it does not look like to have changed/fixed anything important for us.

 

[bombardier10]

There is a new BIOS F5, but it does not look like to have changed/fixed anything important for us.

Maybe it fixed OC for 11 gen CPU ?

 

[root2]

I just noted that there is a guide for the

Gigabyte Z590 VISION D

now too. Thanks to @tsanko.dimitrov. As the two boards are very very similar, we may be able to learn something new there.

 

[tsanko.dimitrov]

I already made up my mind, given that the TB4 ports only support USB 3.2 and that I do not own any TB device, I opted for the Vision G board, and invest the saved money into a RX560, because it looks like my RX 6700 XT is not supported any time soon. Thus, I will use two different GPUs at the same time, use the 6700 XT for gaming on Windows 10, and the RX560 for working on Big Sur.

Meanwhile, I also invested 40€ in a FV-T919 (BCM94360CD) because it works out of the box.
FYI: According to the OpenIntelWireless project, the AX210 is currently NOT supported.

Edit (I updated my old post, they ship AX200, not AX210, sorry for the confusion):
GIGABYTE Z590 Vision D
Manual: Intel Wi-Fi 6 AX200 - Port: CNVi

https://download.gigabyte.com/FileList/Manual/mb_manual_z590-vision-d_e.pdf

GIGABYTE Z590I Vision D
Manual: Intel Wi-Fi 6 AX200 - Port: M2_WIFI

https://download.gigabyte.com/FileList/Manual/mb_manual_z590i-vision-d_1001_e.pdf

Hi @root2 , my board GB Z590 VISION D came with AX210 and the CNVi port accept M2_WiFi too. I have swapped the Intel AX210 with a BCM94360NG for having native WiFi and Bluetooth incl. Airdrop and Handoff.

This is the WiFi module supplied with my board. It has a regular M2 Key E A

 

[Aryaindrayasa]

Hello! Would you please help me? Before I updated the open core to 0.7.4 and updated Kext, my Bluetooth and wifi were OK, but now I can't use Bluetooth ( i use Broadcom BCM943602CS )

The device is connected when plugged with a cable, but the keyboard and magic mouse is not connected when I unplug the cable—attached is my EFI file.

 

[Feartech]

Hello! Would you please help me? Before I updated the open core to 0.7.4 and updated Kext, my Bluetooth and wifi were OK, but now I can't use Bluetooth ( i use Broadcom BCM943602CS )

The device is connected when plugged with a cable, but the keyboard and magic mouse is not connected when I unplug the cable—attached is my EFI file.

XhciPortLimit needs to be Disabled if you have setup your ports correctly

 

[Aryaindrayasa]

XhciPortLimit needs to be Disabled if you have setup your ports correctly

Thank you, but still not working , I try both methods :
- USBPorts.kext without USBInjectall.kext
- SSDT-UIAC-Z590-VISION-G-V1.aml with USBInjectall.kext
and then disable XhciPortLimit, but still not working

 

[Feartech]

Thank you, but still not working , I try both methods :
- USBPorts.kext without USBInjectall.kext
- SSDT-UIAC-Z590-VISION-G-V1.aml with USBInjectall.kext
and then disable XhciPortLimit, but still not working

make sure you have set your bluetooth connector as internal