IMHO Displayport does not support audio at all. Only HDMI can transport audio.Thanks for your help
I fixed it using SMBIOS ImacPro1.1
I have another problem, after sleep the audio of the Dislpayport does not work, only Realtek USB 2.0 Audio works.
agdpmod=pikera
already?There is a new BIOS F5, but it does not look like to have changed/fixed anything important for us.
Hi @root2 , my board GB Z590 VISION D came with AX210 and the CNVi port accept M2_WiFi too. I have swapped the Intel AX210 with a BCM94360NG for having native WiFi and Bluetooth incl. Airdrop and Handoff.I already made up my mind, given that the TB4 ports only support USB 3.2 and that I do not own any TB device, I opted for the Vision G board, and invest the saved money into a RX560, because it looks like my RX 6700 XT is not supported any time soon. Thus, I will use two different GPUs at the same time, use the 6700 XT for gaming on Windows 10, and the RX560 for working on Big Sur.
Meanwhile, I also invested 40€ in a FV-T919 (BCM94360CD) because it works out of the box.
FYI: According to the OpenIntelWireless project, the AX210 is currently NOT supported.
Edit (I updated my old post, they ship AX200, not AX210, sorry for the confusion):
GIGABYTE Z590 Vision D
Manual: Intel Wi-Fi 6 AX200 - Port: CNVi
GIGABYTE Z590I Vision D
Manual: Intel Wi-Fi 6 AX200 - Port: M2_WIFI
XhciPortLimit needs to be Disabled if you have setup your ports correctlyHello! Would you please help me? Before I updated the open core to 0.7.4 and updated Kext, my Bluetooth and wifi were OK, but now I can't use Bluetooth ( i use Broadcom BCM943602CS )
The device is connected when plugged with a cable, but the keyboard and magic mouse is not connected when I unplug the cable—attached is my EFI file.
Thank you, but still not working , I try both methods :XhciPortLimit needs to be Disabled if you have setup your ports correctly
make sure you have set your bluetooth connector as internalThank you, but still not working , I try both methods :
- USBPorts.kext without USBInjectall.kext
- SSDT-UIAC-Z590-VISION-G-V1.aml with USBInjectall.kext
and then disable XhciPortLimit, but still not working