- Joined
- Feb 16, 2012
- Messages
- 481
- Motherboard
- Asus Z790-P WiFi
- CPU
- i9-14900KF
- Graphics
- RX 6600
- Mac
- Classic Mac
- Mobile Phone
2. OriginalFirmware-Z590iTH4-test02.bin
3. OriginalFirmware-Z590iTH4-test03.bin
Code:
MacBook-Air:~ macbook$ flashrom -p ch341a_spi
flashrom v1.2 on Darwin 18.7.0 (x86_64)
flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK.
libusb: info [darwin_claim_interface] no interface found; setting configuration: 1
Found Winbond flash chip "W25Q80.V" (1024 kB, SPI) on ch341a_spi.
No operations were specified.
MacBook-Air:~ macbook$ flashrom -p ch341a_spi -w OriginalFirmware-Z590iTH4-test02.bin
flashrom v1.2 on Darwin 18.7.0 (x86_64)
flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... delay loop is unreliable, trying to continue OK.
Found Winbond flash chip "W25Q80.V" (1024 kB, SPI) on ch341a_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... VERIFIED.
MacBook-Air:~ macbook$ flashrom -p ch341a_spi -v OriginalFirmware-Z590iTH4-test02.bin
flashrom v1.2 on Darwin 18.7.0 (x86_64)
flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK.
Found Winbond flash chip "W25Q80.V" (1024 kB, SPI) on ch341a_spi.
Verifying flash... VERIFIED.
3. OriginalFirmware-Z590iTH4-test03.bin
Code:
MacBook-Air:~ macbook$ flashrom -p ch341a_spi
flashrom v1.2 on Darwin 18.7.0 (x86_64)
flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK.
libusb: info [darwin_claim_interface] no interface found; setting configuration: 1
Found Winbond flash chip "W25Q80.V" (1024 kB, SPI) on ch341a_spi.
No operations were specified.
MacBook-Air:~ macbook$ flashrom -p ch341a_spi -w OriginalFirmware-Z590iTH4-test03.bin
flashrom v1.2 on Darwin 18.7.0 (x86_64)
flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK.
Found Winbond flash chip "W25Q80.V" (1024 kB, SPI) on ch341a_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... VERIFIED.
MacBook-Air:~ macbook$ flashrom -p ch341a_spi -v OriginalFirmware-Z590iTH4-test03.bin
flashrom v1.2 on Darwin 18.7.0 (x86_64)
flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... delay loop is unreliable, trying to continue OK.
Found Winbond flash chip "W25Q80.V" (1024 kB, SPI) on ch341a_spi.
Verifying flash... VERIFIED.
Last edited: