Contribute
Register

[GUIDE] HP Elitebook 8470p Radeon - 10.13+11.+12. | OpenCore

In thienluong89 EFi you only need PM under ACPI, paste this to "my" postEfi and make a try.

If it's fail, you grab preEfi and boot to the Desktop. Open a Terminal and paste one by one:
1-curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh
2-chmod +x ~/ssdtPRGen.sh
3-sudo ~/ssdtPRGen.sh -x 1

Finder/Go/Go to Folder and type ~/Library/ssdtPRGen/
Rename SSDT.aml to SSDT-PM and paste to the postEFI - ACPI folder, then paste this PostEfi folder to the Disk/Efi. - Restart, see what is happening. Please use ProperTree and Cmd+Shift+R every time when you're changing the EFI folder. This is crucial.
Thank you for always supporting @DaveJ1 and @thienluong89. My account was banned because breaking the forum rules-lack of Motherboard model in my signature :(
My improvement actives are:
(I) - Follow the DaveJ1's guide as above for both 2 cases, but always stuck after IOConsoleUser: gIOscreenLockstate 3:hs0,bs0,now0,sm0x0

(II) - Got @thienluong89 's EFI 0.7.2 and tried with High Sierra and Big sur: once boot loop and once can't see installer USB (SMBIOS macbook pro11,2 and 14,3)

(III) - Used EFI 0.7.3 can boot and finish with High Sierra + CataLina but AMD graphic get 3MB


(IV) - Used Ledinhthanh's EFI with High Sierra but only processing at IOConsoleUser: gIOscreenLockstate 3:hs0,bs0,now0,sm0x0 and black screen appears.

There're too many errors and cases. Looks like @thienluong89 's laptop is i5 + HD4000?

Sorry because I've know about hackintosh few weeks ago. Could you give me some advices?
BRG.
 
Thank you for always supporting @DaveJ1 and @thienluong89. My account was banned because breaking the forum rules-lack of Motherboard model in my signature :(
My improvement actives are:
(I) - Follow the DaveJ1's guide as above for both 2 cases, but always stuck after IOConsoleUser: gIOscreenLockstate 3:hs0,bs0,now0,sm0x0

(II) - Got @thienluong89 's EFI 0.7.2 and tried with High Sierra and Big sur: once boot loop and once can't see installer USB (SMBIOS macbook pro11,2 and 14,3)

(III) - Used EFI 0.7.3 can boot and finish with High Sierra + CataLina but AMD graphic get 3MB


(IV) - Used Ledinhthanh's EFI with High Sierra but only processing at IOConsoleUser: gIOscreenLockstate 3:hs0,bs0,now0,sm0x0 and black screen appears.

There're too many errors and cases. Looks like @thienluong89 's laptop is i5 + HD4000?

Sorry because I've know about hackintosh few weeks ago. Could you give me some advices?
BRG.
@Congnguyenbk93 most easy way and no need modify anything by your self (of course you need change BIOS setting as guide) is using Chris guide
If only CPU PM problem, you can try my latest SSDT-PM as attached file because as DaveJ1 comment I re-check and do some modify for it.
My hardware same as you HP 8470p - i5 3320M - HD4000 only
 

Attachments

  • SSDT-PM210904.aml
    1.8 KB · Views: 54
@Congnguyenbk93 most easy way and no need modify anything by your self (of course you need change BIOS setting as guide) is using Chris guide
If only CPU PM problem, you can try my latest SSDT-PM as attached file because as DaveJ1 comment I re-check and do some modify for it.
My hardware same as you HP 8470p - i5 3320M - HD4000 only
Thanks you. I don’t know where is the error but i’ll try your SSDT-PM.
My laptop is i5 3320M - AMD 7570m only, same as DaveJ1’ Laptop (# CPU)
 
hi @DaveJ1,
Do you have picture of Intel Power Gadget on your hackintosh?
I just want to refer to yours because today when I compare between Intel Power Gadget on my Windows 11 and hackintosh I see maybe my hackintosh seem doesn't complete enable for XCPM (I think CPU PM is OK - by checked IORegistry as below pic).

On Hackintosh
Screen Shot 2021-09-21 at 16.18.55.png

And on Windows 11
IPG-Windows.jpg

One other thing, I following this guide but after finished SSDT-PM and check "sysctl machdep.xcpm.mode" it still display 0 (not 1 as it should be). Show it really XCPM not enable yet? Should I do Fixing CFG Lock ?
 
Last edited:
Thank you for always supporting @DaveJ1 and @thienluong89. My account was banned because breaking the forum rules-lack of Motherboard model in my signature :(
My improvement actives are:
(I) - Follow the DaveJ1's guide as above for both 2 cases, but always stuck after IOConsoleUser: gIOscreenLockstate 3:hs0,bs0,now0,sm0x0

(II) - Got @thienluong89 's EFI 0.7.2 and tried with High Sierra and Big sur: once boot loop and once can't see installer USB (SMBIOS macbook pro11,2 and 14,3)

(III) - Used EFI 0.7.3 can boot and finish with High Sierra + CataLina but AMD graphic get 3MB


(IV) - Used Ledinhthanh's EFI with High Sierra but only processing at IOConsoleUser: gIOscreenLockstate 3:hs0,bs0,now0,sm0x0 and black screen appears.

There're too many errors and cases. Looks like @thienluong89 's laptop is i5 + HD4000?

Sorry because I've know about hackintosh few weeks ago. Could you give me some advices?
BRG.
(I) - Click. - I got this error all time, at this point my guest is because of XCPM.

(II) - thienluong89 has integrated graphics, you have dedicated. You only need the generated SSDT for the CPU management(for PostEfi).

(III) - The ideal SMBIOS will be the MacBookPro9,2 & MacBookPro10,2, this is the closest for you, with -no compat check boot args. Other than that is MacBookPro11,1. (14,3 is way out)
- For High Sierra, need a little different OC, but the best way is Clover. On Mojave and Catalina you're not get graphics acceleration, because it’s using Metal instead of OpenGL, and the next OS after HSierra, is Big Sur with Legacy Patch.
(many thanks for the persistent work of the developers and for sharing it all with the community. - Why there's no non-Metal patches for Monterey.)

If you stuck, you can always go back to my guide or Dortania’s.
Now, you have the SSDT-PM, start over and follow every steps. If you need, do a BIOS reset and follow this at the bottom.
 
hi @DaveJ1,
Do you have picture of Intel Power Gadget on your hackintosh?
I just want to refer to yours because today when I compare between Intel Power Gadget on my Windows 11 and hackintosh I see maybe my hackintosh seem doesn't complete enable for XCPM (I think CPU PM is OK - by checked IORegistry as below pic).

On Hackintosh
View attachment 529332
And on Windows 11
View attachment 529333
One other thing, I following this guide but after finished SSDT-PM and check "sysctl machdep.xcpm.mode" it still display 0 (not 1 as it should be). Show it really XCPM not enable yet? Should I do Fixing CFG Lock ?
It seems to be right, the graphs and the IoReg.

In your config under Kernel/Quirks AppleXcpmCfgLock and AppleXcpmExtraMsrs is set to No. First set to Yes the CfgLock and try, if still not showing 1 then ExtraMsrs.

If this two is not working, under Kernel/Patch add the Xcpm patch from my config.
 
It seems to be right, the graphs and the IoReg.

In your config under Kernel/Quirks AppleXcpmCfgLock and AppleXcpmExtraMsrs is set to No. First set to Yes the CfgLock and try, if still not showing 1 then ExtraMsrs.

If this two is not working, under Kernel/Patch add the Xcpm patch from my config.
Thanks DaveJ1. It seem not effect to my hackintosh. I just find some Tips from Piker. Let me try it.
 
Thanks DaveJ1. It seem not effect to my hackintosh. I just find some Tips from Piker. Let me try it.
There is a note under the Lenovo guide. "This guide only exists to show you that you can re-enable it – not that you should do it!" - If you haven't noticed any drawbacks, then leave it.
 
(I) - Click. - I got this error all time, at this point my guest is because of XCPM.

(II) - thienluong89 has integrated graphics, you have dedicated. You only need the generated SSDT for the CPU management(for PostEfi).

(III) - The ideal SMBIOS will be the MacBookPro9,2 & MacBookPro10,2, this is the closest for you, with -no compat check boot args. Other than that is MacBookPro11,1. (14,3 is way out)
- For High Sierra, need a little different OC, but the best way is Clover. On Mojave and Catalina you're not get graphics acceleration, because it’s using Metal instead of OpenGL, and the next OS after HSierra, is Big Sur with Legacy Patch.
(many thanks for the persistent work of the developers and for sharing it all with the community. - Why there's no non-Metal patches for Monterey.)

If you stuck, you can always go back to my guide or Dortania’s.
Now, you have the SSDT-PM, start over and follow every steps. If you need, do a BIOS reset and follow this at the bottom.
Sorry sir, i can not finish hackintosh on may laptop, almost functions not work(battery, USB map, sleep and wake,...) except card graphic.
Could you check or patch ssdt for me??? This's my ssdt that i dumped on my laptop from windows 10 with SSDT-Timemaster.
Thank you.
 
Sorry sir, i can not finish hackintosh on may laptop, almost functions not work(battery, USB map, sleep and wake,...) except card graphic.
Could you check or patch ssdt for me??? This's my ssdt that i dumped on my laptop from windows 10 with SSDT-Timemaster.
Thank you.
EC and HPET is ok.
Could you describe for the most part how you do the installation?
 
Back
Top